[ortis]

A Good clone of VCDS real HEX 2 is  STM32F405 ARM. This one can be updated

[fantomel]

To be very clear, stop this junk on using new versions of vcds with old loader 9.2 for atmega because that serial has been blacklisted. best case scenario is that your computer has no internet and maybe your old interface will work 1-2 times then error.

Now regarding the new ones, stm chinese, upgradable or not, all of them have some type of issues after 2020 versions with all loaders until now released (see dk topic of ~750 pages of discussions).

So, wanna play or stay stable here you have shared the kits and loaders for both old and new devices in english.

Files are uploaded in yandex like this not all idiots with a fake email can open complains and if you can't download them then open a free account with 3 clicks, import the packages to your new account and download them from there.

[Raimo5]

Hello,

I have an issue with HEX+CAN cable. Port test is good when car is not connected, but when I connect 2011 Skoda Superb, it will say interface not found.

Hope someone can help me with that.

[jhon006]

Hello,

I have an issue with HEX+CAN cable. Port test is good when car is not connected, but when I connect 2011 Skoda Superb, it will say interface not found.

Hope someone can help me with that.

Use Fantomel loader

[Raimo5]

Hello,

I have an issue with HEX+CAN cable. Port test is good when car is not connected, but when I connect 2011 Skoda Superb, it will say interface not found.

Hope someone can help me with that.

Use Fantomel loader

Thank you for your reply. There are loads of different loaders and VCDS version from Fantomel. Can you suggest which one I should use?

[dani3lxxl]

Hello,

I have an issue with HEX+CAN cable. Port test is good when car is not connected, but when I connect 2011 Skoda Superb, it will say interface not found.

Hope someone can help me with that.

it's possible that the interface is blocked (the bootloader should be disabled to be able to update), many people are satisfied with those files, but those from Fantomel are also good!

[Raimo5]

How do I go about disabling the bootloader and what exactly should I be updating?

Pardon my lack of knowledge, but I'm not very familiar with VCDS systems and requirements and I don't own a VAG car myself. Trying to get it all up and running so I can help out a friend with some electronic diagnostics. Hope you can guide me through this.

Thanks

[MORKAS]

Greetings, I just tried, and it doesn't work for me, and I think it's because of the firmware I have on my vagcom UDS can cable, it's the V2, clone... until today I used the VIPLUS to patch the vagcom and update the firmware, but this loader that brings this version, 22.9, is not valid for me. Is there a newer version of VIPLUS?, thanks

By the way, my cable cost me €180, so I suppose that in theory it would be valid, right?

If you Paid 180 Euro its probably a STM Cable and not ATMEGA.

Greetings, from what I see, that version of VCDS cable with that Atmega chip, it's easier for updates to appear, right? And where can I buy that cable? I didn't mind buying that version, I guess it's not very expensive, and I have a question, is it updatable? Thank you