Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
PCR2.1 dead after bad flash write,how to restore?
08-09-2022, 12:45 PM,
Post: #1
|
|||
|
|||
PCR2.1 dead after bad flash write,how to restore?
Hallo
i have problem ecu is dead after bad flash write,now cant read and write this ecu,no diagnostic communication,only can read ID,how i solved this problem? how i can direct write org file? Thanks |
|||
08-09-2022, 15:53 PM,
Post: #2
|
|||
|
|||
RE: PCR2.1 dead after bad flash write,how to restore?
For restore this ecu need original file (.frf) type and with ODIS Engineering (can be clone) flashing.
If i helpful to you, please push Reputation and Thanks buttons.
|
|||
08-09-2022, 16:15 PM,
Post: #3
|
|||
|
|||
RE: PCR2.1 dead after bad flash write,how to restore?
|
|||
08-09-2022, 21:02 PM,
Post: #4
|
|||
|
|||
RE: PCR2.1 dead after bad flash write,how to restore?
But this procedure working just Odis-Engineering, but not working with Odis-Service.
You not check ID or other mode, immediately select Engine ECU Flash function, load file and start flashing. I have same problem and solved only with Odis-Engineering like this video (link attachment). Try and You |