Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
FGTECH GALLETTO HARDWARE FIX AND DIFFERENCE
14-05-2015, 06:43 AM,
(This post was last modified: 10-06-2015, 18:50 PM by fantomel.)
Post: #1
|
|||
|
|||
FGTECH GALLETTO HARDWARE FIX AND DIFFERENCE
Hi, after talking with some friends and looking on different forums, searching, i have managed to make a more proper interface with these changes. Changes made are also explained a little so that anyone can understand.
Please make zoom on picture to have a closer look Keep in mind to use good components from companys like ST MICROELECTRONICS, NXP and OMRON and not some low ones. Also since i was searching around, i have found different fixes in different forums but no one explained if it is for tool 0386 or 0475 so i have gathered all of them, tested on my 0475 tool and with the help of a friend that has 0386 tool you will find my conclusion explained and if you want to have a look at it i have added inside a little program hexcmp to compare it yourself. Also looking around in all the fixes i have found that ept file are in fact 2 models, i have attached them both and in a txt file you will find the difference. P.S. For those that have china v54 0386 you have some missing pieces compared to this one for example below big relays, if you want to have a closer look at this board i have posted HERE some more detailed pictures to see the little smd and so on. |