[diagso]

I'm going banans with retrofit of front LED lights (LCI and pre-LCI) to 2015 F56 Cooper D and not planning to add LWR


Whatever I do below errors always come back on BDC with effect that only indicators are not working at all ( not even blinking fast)

BDC - Body Domain Controller
80418A -> Output, front left indicator faulty
80418B -> Output, front right indicator faulty
80418D -> Output, right auxiliary indicator faulty

What I did thus far:

1. Rear LCI lights retrofit withe HELC - works perfect
2. Added 5A2 to VO and coded BDC and lamps ECU's on pre-LCI hardware
3. Disabled LWR via FDL
4. Updated whole car to 07.2022 iLevel
5. Replicated point 2 and 3 with K552(retrofit of LCI adaptive lamps) on LCI headlamps
6. Tried 5A4 coding just to check if anything changes but still exactly the same errors return
7. Fooled around with BDC FDL coding
8. BDC exchange to 2017 F15's and got stuck in exactly same place

I've read that car BDC might be not compatible hence I took one that I had lying around from F15 2017 with 524 and all round cameras plus parking assistantand cloned Mini BDC to it. Then programing it via ESYS and coded. Outcome is exactly the same as on ori BDC. 

Happy to pay for support with solving my MINI nightmare retrofit

[Siki78]

Can you post your fa and svt_ist?

[juantg93]

you may need to code the bdc module using a fa from an lci car. Or try to increase the manufacturing date

[Siki78]

Yes that is what I did on f46 code with lci type code i think is XN32 but want to check it first

[diagso]

Can you post your fa and svt_ist?

Knock yourself out

Thanks for intrest in my issue!

---

Yes that is what I did on f46 code with lci type code i think is XN32 but want to check it first

Mine bastard is XN31, should I go for LCI typecode ?

---

you may need to code the bdc module using a fa from an lci car.  Or try to increase the manufacturing date

Most defenietly will give it a go, somhow did not think about that.

My only doubt is why pre-LCI headlamps are not functioning properly after adding 5A2 on a pre LCI car.

[sambir]

First of all… what lci headlights are you installing?
Next what headlights do you have now?
i can help you. Send me a pm…

You dont need to set lci type.

[laquangksxd]

you need to use Fa lci for coding. I sent you 1 pm

[sambir]

You dont need fa of lci for coding. It is easier than you think yet it all depends on what type of lci you are fitting….just changing date is enough but you must do fdl coding…

[jaramillo]

Just disable check bulbs, no need more...did this multiple times

[diagso]

Just disable check bulbs, no need more...did this multiple times

Indicators are not workig at all, so how disabling checks can solve this ?

---

You dont need fa of lci for coding. It is easier than you think yet it all depends on what type of lci you are fitting….just changing date is enough but you must do fdl coding…

I'm installing 5A2 - LED lights (non adaptive ones). I have three sets of lamps now:

- original halogen
- pre-LCI LED
- LCI LED

Now on the car I have installed pre-LCI lamps and VO coding for such - just added 5A2 to VO and coded BDC and LED drivers in lamps. Then I disabled LWR via FDL. Outcome no indicators.Please see part numbers.

I can instal LCI headlamps if this could be easier to address.

---

you need to use Fa lci for coding.  I sent you 1 pm

I will reach out to you once I'm in my garage if time diffrence wont become a problem since I'm located on CET zone.