[Arbe]

Here,

Tech2Win V 2.402, for GM Brands

Clean version, no fix, no cards and no password.

Grateful, add reputation and thanks

link t2win.txt
File Type:
Downloaded:	217 times
Size:	72 bytes

[WhiteAndBlue]

Fixed exe, free, no pass
Grateful, add reputation and thanks 

[pupu144]

Fixed exe, free, no pass
Grateful, add reputation and thanks 

Hi,

Unfortunately, your EXE don't work for me (with a J2534 tool) - it shutdowns shortly after launch, without any errors.

[mattydr67]

Firs of all Tech2win it doesn't work with J2534 tool.
Tech2win it works with approved interface as:
GM MDI
GM MDI2
Bosch Mastertech
Bosch Mastertech 2
GM Mongoose Pro2.
Cardaq Plus 2 and 3 ( maybe with other Cardaq tools )
AVDI original.
VCX Nano

Usually any tool has to have a Tech2win emulator to works.
If anyone tested any other tools with Tech2win let us. ( me I am not intrested I am using it with original GM MDI )

If it starts and closed when you try to connect to an ecu then this is because the crack.
Who have Global Tis installed then can add lease for 1 day using Security Acces.
Actually even you have a good crack you will need Security Acces.

Good luck

[pupu144]

Well, previous "fixed" exe (2.3xx something) at least allowed to choose from any installed J2534 drivers in the system, and did not crash.
Have not had a chance to scan any car supported by Tech2 yet, as I've came around MY2012+ Opels only. And those models were covered by GDS2 already.

[mattydr67]

J2534 drivers? Which one mate. Name a tool that it is able to use it with Tech2win instead the one I mentioned before.
It will help many peaple do not ask always in different threads if it works or not?
Good luck

[Arturino]

Well, previous "fixed" exe (2.3xx something) at least allowed to choose from any installed J2534 drivers in the system, and did not crash.
Have not had a chance to scan any car supported by Tech2 yet, as I've came around MY2012+ Opels only. And those models were covered by GDS2 already.

As far as I know, Tech2Win does not support J2534 protocol, but it works with D-PDU, which is supported by MDI, MDI2, Avdi, etc.

[mattydr67]

Just for fun because I have a genuine MDI.
I did a test using Tech2win with my genuine Ford VCM2
It works but not full. On k-line cars it connects on controllers on pin 7 (do not connect on pin 3 8 or 12) and on CAN BUS controllers on HS-CAN and MS-CAN. Doesn't connect on SW-CAN (pin 1)
It doesn't see it as an approved interface.
Good luck

[Fox-1VietNam]

vcm 2 ford not work gm pin 1 obd2