[omega1]

Hi everybody!



I downloaded the DAS 10.2008 vmware installation and am trying to run it.
I have a Chinese C4 doip mux. The mux connects to the laptop, but I get the error shown in the attached photo when determining the car. PHOTO: 
xxxxxxxxxxxxxxxxxxxxxxxx
I connected it to the laptop, my friend's plain C4 is not a doip mux, there is no problem with it, the program works well.

Does anyone have an idea to fix the error, can anyone help?

[energjia]

Hi everybody!


I downloaded the DAS 10.2008 vmware installation and am trying to run it.
I have a Chinese C4 doip mux. The mux connects to the laptop, but I get the error shown in the attached photo when determining the car. PHOTO: 
xxxxxxxxxxxxxxxxxxxxxxxx
I connected it to the laptop, my friend's plain C4 is not a doip mux, there is no problem with it, the program works well.

Does anyone have an idea to fix the error, can anyone help?

look here https://cartechnology.co.uk/showthread.php?pid=499545

[omega1]

Hi everybody!


I downloaded the DAS 10.2008 vmware installation and am trying to run it.
I have a Chinese C4 doip mux. The mux connects to the laptop, but I get the error shown in the attached photo when determining the xxxxxxxxxxxxxxxxxxxxxxxxxx
I connected it to the laptop, my friend's plain C4 is not a doip mux, there is no problem with it, the program works well.

Does anyone have an idea to fix the error, can anyone help?

look here https://cartechnology.co.uk/showthread.php?pid=499545

My cal.ini setting is PLATFORM=PART_T, but I've tried setting "W" and "T2" as well, but it didn't lead to results.

[gcs190]

At that time there was no DOIP, if you are using an EOBD DOIP cable, its identifier is not the same as the standard EOBD cable, that may be the problem: it does not recognize it.

[omega1]

The problem was solved by using an older non-DOIP cable, thank you for your help!