Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. AutoHex II

  2. FemtoEVO

  3. Cas4 & Cas4+



27-11-2018, 00:14 AM,
Post: #381
RE: FSTOOL
(05-12-2016, 15:04 PM)flashdaemon Wrote:  Anyone knows how to make original certificates (*.xml and *.der) from CIC if I have extracted them (SWT controller & data03) via FTP?

Dear all,

My first post here ( hi )...
I have a similar question: I managed to extract the data01, data02 and data03 files from my old, dead, CIC (factory installed). Only data03 seems to be vehicle specific. Can I load this back onto my replacement CIC somehow using ftp/telnet? Do I have to to convert this to fcert.swt (etc) first? Or is this a lost case? The CIC is already coded with the correct vehicle VIN.

Thanks,
Jacco

__________
2001 E39 540i 6MT; 2010 E91 328i RWD ZMP; 2000 R1100R
Quote this message in a reply
19-01-2019, 03:00 AM,
Post: #382
RE: FSTOOL
Hello all.

I've been trying to install 2019 map update to my script activated cic on E60.
when I triy to execute check FSC, error [2090] always come up.

error.log shows below..

ERROR! Module: KrApiLib.cpp, Proc: GetAuthKey, LineNr: 625, ErrorNr: -8
CANNNOT FIND ECU IN SG-ID-FILE
ERROR! Module: KrApiLib.cpp, Proc: GetAuthKey, LineNr: 625, ErrorNr: -8
CANNNOT FIND ECU IN SG-ID-FILE
[22:51:22.514] [2019-01-12] [CarServer] 2090 Error COAPI2.CPP coapiRunCabd 6
[22:51:22.514] [2019-01-12] [CarServer] Authentification format error CHECK_FSC

I have copied cfgdat, daten, sgdat files from ediabas and inpa, but still getting error.

Does anybody have suggestions?

Thanks
Vi
Quote this message in a reply
25-02-2019, 01:19 AM, (This post was last modified: 25-02-2019, 01:20 AM by sergiompais.)
Post: #383
RE: FSTOOL
(19-01-2019, 03:00 AM)vivien Wrote:  Hello all.

I've been trying to install 2019 map update to my script activated cic on E60.
when I triy to execute check FSC, error [2090] always come up.

error.log shows below..

ERROR! Module: KrApiLib.cpp, Proc: GetAuthKey, LineNr: 625, ErrorNr: -8
CANNNOT FIND ECU IN SG-ID-FILE
ERROR! Module: KrApiLib.cpp, Proc: GetAuthKey, LineNr: 625, ErrorNr: -8
CANNNOT FIND ECU IN SG-ID-FILE
[22:51:22.514] [2019-01-12] [CarServer] 2090 Error COAPI2.CPP coapiRunCabd 6
[22:51:22.514] [2019-01-12] [CarServer] Authentification format error CHECK_FSC

I have copied cfgdat, daten, sgdat files from ediabas and inpa, but still getting error.

Does anybody have suggestions?

Thanks
Vi

what he/she said!
Quote this message in a reply
10-03-2019, 08:34 AM,
Post: #384
RE: FSTOOL
I have a exception_access_violation while starting start_FSTool_v2_CarServer.bat
It seems like a Java problem, any solutions?
Quote this message in a reply
11-03-2019, 19:26 PM,
Post: #385
RE: FSTOOL
Do anyone have the 2.0.2.00 version? I am becoming fool trying to update the carserver and have no managed to do that,try with a dcan cable, icom a old and even with an icom next ... but allways get an error.

Would be anyone so kind to share it?

thanks in advanced.
Quote this message in a reply
13-03-2019, 19:50 PM, (This post was last modified: 13-03-2019, 19:51 PM by chrisCX.)
Post: #386
XZBMW  RE: FSTOOL
Hi together,

i´ve read a lot in this forum during my retrofit CIC project. But currently i don´t find the solution....

I´ve written my VIN with tool32 on 3 places, virginalized my cic and created the certificates with the file package from https://cartechnology.co.uk/showthread.php?tid=23198

So afterwards i imported into my cic with the FSTool and checked with FSC Tools the status. 
During the import i get full success, but it works at the end only for Voice Control and i do the same for the other FSC.....i´ve done it again (change vin, sign, save and store) but same result.

I think i need a little hint to reach my goal smile
Please have a look at my uploaded files.


Attached Files Thumbnail(s)
           
Quote this message in a reply
23-03-2019, 02:01 AM,
Post: #387
RE: FSTOOL
(13-03-2019, 19:50 PM)chrisCX Wrote:  Hi together,

i´ve read a lot in this forum during my retrofit CIC project. But currently i don´t find the solution....

I´ve written my VIN with tool32 on 3 places, virginalized my cic and created the certificates with the file package from https://cartechnology.co.uk/showthread.php?tid=23198

So afterwards i imported into my cic with the FSTool and checked with FSC Tools the status. 
During the import i get full success, but it works at the end only for Voice Control and i do the same for the other FSC.....i´ve done it again (change vin, sign, save and store) but same result.

I think i need a little hint to reach my goal smile
Please have a look at my uploaded files.

try
store sig cert
check sig cert
 execute

load fsc

then 
store fscs cert
check fscs cert
store fsc
check fsc
execute

always work for me.  if that don't work use dr gini.
Quote this message in a reply
02-04-2019, 00:20 AM,
Post: #388
RE: FSTOOL
Anyone fix error 2090?

Log shows

CANNNOT FIND ECU IN SG-ID-FILE

Is there some files I am missing in the carserver?
Quote this message in a reply
08-04-2019, 13:34 PM,
Post: #389
RE: FSTOOL
Can anyone share the java 1.4.2?
Quote this message in a reply
11-06-2019, 03:39 AM,
Post: #390
RE: FSTOOL
(25-02-2019, 01:19 AM)sergiompais Wrote:  
(19-01-2019, 03:00 AM)vivien Wrote:  Hello all.

I've been trying to install 2019 map update to my script activated cic on E60.
when I triy to execute check FSC, error [2090] always come up.

error.log shows below..

ERROR! Module: KrApiLib.cpp, Proc: GetAuthKey, LineNr: 625, ErrorNr: -8
CANNNOT FIND ECU IN SG-ID-FILE
ERROR! Module: KrApiLib.cpp, Proc: GetAuthKey, LineNr: 625, ErrorNr: -8
CANNNOT FIND ECU IN SG-ID-FILE
[22:51:22.514] [2019-01-12] [CarServer] 2090 Error COAPI2.CPP coapiRunCabd 6
[22:51:22.514] [2019-01-12] [CarServer] Authentification format error CHECK_FSC

I have copied cfgdat, daten, sgdat files from ediabas and inpa, but still getting error.

Does anybody have suggestions?

Thanks
Vi

what he/she said!

Hi

Do you happen to know where SG-ID file stored? 
As I wrote on previous, I checked all folder under car server, and copied as much as possible file might include ECU data, but no luck..

Vi
Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  FSTool Import Issues - 6F and 9C Only mxchris727 5 602 01-10-2019, 00:11 AM
Last Post: codemybmw
XZBMW Help with CIC patch, fstool duss46 2 393 09-09-2019, 21:32 PM
Last Post: duss46
  fstool any help how to use and connect !!??? rana 0 186 07-06-2019, 07:26 AM
Last Post: rana
XZBMW HELP INSTALL FSTOOL atalay 3 513 23-04-2019, 20:32 PM
Last Post: ____ANGEL___
XZBMW Problems with insert fscs with fstool atalay 7 561 14-04-2019, 10:17 AM
Last Post: atalay
XZBMW FSTool Error spk1338 2 664 02-02-2019, 01:37 AM
Last Post: flacoramos
XZBMW Help FSTOOL[11049] CIC retrofit Rawediag 7 1,359 31-10-2018, 20:33 PM
Last Post: duckdonald
XZBMW FSTOOL installation problem yzc729 14 7,171 11-10-2018, 09:24 AM
Last Post: Sanyi85
XZBMW FSTool FSC create Justiinnn98 5 1,651 24-06-2018, 00:11 AM
Last Post: shawnsheridan
  Solved ✔ FStool - CHECK_FSC - Map update - Video - Need help! Nixer 7 4,221 19-10-2017, 13:26 PM
Last Post: Nixer

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content