Possibly Related Threads…

***hayk57*** · 14-03-2023, 18:08 PM,

Hi guys,

I have an F44 BMW with front crash the MRR was changed and I have to adapt it to the car.

I have a FSC repair pack for the car I am putting the FSC for MRR it is accepted for a few minutes (arround 10 minutes) and everything is working well no DTC and after that period of time it is rejected.

After storing FSC:

Code:
MRR[DiagAddress=33(0x21)]

WBA11AL0007F95832

RootCertStatus not available

SWSigStatus accepted

SWTApplications

----------

AppID 329(0x149)

UpgradeIndex 1(0x01)

SWTType SWTclassic light

FSCStatus accepted

FSCCertStatus not available

After 10 minutes:

Code:
MRR[DiagAddress=33(0x21)]

WBA11AL0007F95832

RootCertStatus not available

SWSigStatus accepted

SWTApplications

----------

AppID 329(0x149)

UpgradeIndex 1(0x01)

SWTType SWTclassic light

FSCStatus rejected

FSCCertStatus not available

I have these DTCs after:

Code:
RESULT:    2 error in error memory !

-------------------------------------------------------------

0x022103   Externe SWT-Prüfbedingung nicht erfüllt

   Testbedingungen erfüllt

   Fehler momentan vorhanden und bereits gespeichert

   Fehler würde kein Aufleuchten einer Warnlampe verursachen

   This is an event DTC. This ecu is NOT RESPONSIBLE for this error entry (DTC).

   (E.g. wrong or missing network information.)

Error code: 02 21 03 2F

-------------------------------------------------------------

0x022104   Interne SWT-Prüfung fehlgeschlagen

   Testbedingungen erfüllt

   Fehler momentan vorhanden und bereits gespeichert

   Fehler würde kein Aufleuchten einer Warnlampe verursachen

   This is no event DTC. This ecu IS RESPONSIBLE for this error entry.

Error code: 02 21 04 2F

Does anyone know of to make the FSC permanently accepted.

Thanks

***Mwahab*** · 14-03-2023, 22:21 PM,

Naive question, did u try to flash it?

***hayk57*** · 14-03-2023, 23:47 PM,

(14-03-2023, 22:21 PM)Mwahab Wrote: Naive question, did u try to flash it?

Yes of course first thing I did

***znakedwrx*** · 15-03-2023, 01:11 AM,

you need someone to give you fsc repair kit and load up FSC code for it.

***hayk57*** · 15-03-2023, 09:32 AM,

I already have a repair kit and loaded it, it’s accepted and then after 10 minutes it is refused.

***vanos*** · 15-03-2023, 10:23 AM,

The sensor is newer than the old one ?

***dasi*** · 15-03-2023, 10:50 AM,

(14-03-2023, 18:08 PM)hayk57 Wrote: Hi guys,

I have an F44 BMW with front crash the MRR was changed and I have to adapt it to the car.

I have a FSC repair pack for the car I am putting the FSC for MRR it is accepted for a few minutes (arround 10 minutes) and everything is working well no DTC and after that period of time it is rejected.

After storing FSC:

Code:
MRR[DiagAddress=33(0x21)] WBA11AL0007F95832 RootCertStatus not available SWSigStatus accepted SWTApplications ---------- AppID 329(0x149) UpgradeIndex 1(0x01) SWTType SWTclassic light FSCStatus accepted FSCCertStatus not available

After 10 minutes:

Code:
MRR[DiagAddress=33(0x21)] WBA11AL0007F95832 RootCertStatus not available SWSigStatus accepted SWTApplications ---------- AppID 329(0x149) UpgradeIndex 1(0x01) SWTType SWTclassic light FSCStatus rejected FSCCertStatus not available

I have these DTCs after:

Code:
RESULT: 2 error in error memory ! ------------------------------------------------------------- 0x022103 Externe SWT-Prüfbedingung nicht erfüllt Testbedingungen erfüllt Fehler momentan vorhanden und bereits gespeichert Fehler würde kein Aufleuchten einer Warnlampe verursachen This is an event DTC. This ecu is NOT RESPONSIBLE for this error entry (DTC). (E.g. wrong or missing network information.) Error code: 02 21 03 2F ------------------------------------------------------------- 0x022104 Interne SWT-Prüfung fehlgeschlagen Testbedingungen erfüllt Fehler momentan vorhanden und bereits gespeichert Fehler würde kein Aufleuchten einer Warnlampe verursachen This is no event DTC. This ecu IS RESPONSIBLE for this error entry. Error code: 02 21 04 2F

Does anyone know of to make the FSC permanently accepted.

Thanks

can be done - newer or older doesn't matter

thanks

***mcrussell*** · 15-03-2023, 21:22 PM,

Was it a new MRR replacement or used?

***hayk57*** · 15-03-2023, 23:43 PM,

It was a used one, I think he got it online. I got the car only for adaptation

***mj_mj_mj*** · 29-03-2023, 10:01 AM,

If the MRR has newer FSC than the ones in the repair pack you are screwed in lack of better wording.

The ONLY way to use second hand parts is if they have OLDER Fsc´s than the original car.

(maybe could work with some type of emulator)

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	NBT ID4 to ID6 issue with FSC	Driss2	7	198	9 hours ago Last Post: stydly
	NBT EVO HDD change tutorial	RuleNormaliai	19	2,472	26-04-2024, 17:23 PM Last Post: grizzle
	Kafas issue aftrer ACC Retrofit	It3_Magic	14	618	23-04-2024, 07:44 AM Last Post: It3_Magic
	TMS FRM3 F10 Coding issue	mj_mj_mj	17	1,952	16-04-2024, 09:30 AM Last Post: user_530d
	buy solution for change ISN for MG1 and MD1	dfb	0	206	15-04-2024, 00:21 AM Last Post: dfb
	BMW G32 6 GT - Central Lock Issue	DaBotta	3	186	06-04-2024, 07:44 AM Last Post: Volum
	The issue from the seventh circle of hell,,, 530d	mj_mj_mj	18	1,194	27-03-2024, 14:07 PM Last Post: ____ANGEL___
	I020 esys connection issue	mcrussell	6	329	25-03-2024, 23:35 PM Last Post: vanos
	BMW e39 530d 2001 problem after MAF change	boweld11	3	170	24-03-2024, 22:44 PM Last Post: SkeYT
	[Question] Change X1 F48 gearbox	jaramillo	9	1,470	24-03-2024, 21:27 PM Last Post: masa52

Contact Us