Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Install 10.25" MGU CID on ENTRYNAV2 (G20)
01-06-2023, 23:54 PM,
Post: #1
|
|||
|
|||
Install 10.25" MGU CID on ENTRYNAV2 (G20)
Hello everyone,
I have ENTRYNAV2 (ID6) and the 8.8" CID on G20 (Live Cockpit Plus). I want to try to upgrade it to the 10.25" screen that comes with MGU. Old Screen is 8.8" CID GEN2 Manufacturer: ALPINE PartNo: 6550 8717540 04 New Screen is 10.25" MGU CID Manufacturer: Visteon (00125611-10, HW0009, SW004B) PartNo: 6550 8798742 04 I've tried changing the VO a couple of ways, but I always end up getting NO SIGNAL. Tried changing: Code: - CID_DISPLAY_RES to 1440_540, 1920_720 In my mind, this is a simple display that needs the HU to output the correct resolution/ratio/color over the APIX protocol? Can help and anyone shed some light on what's going on? Thanks |
|||
02-06-2023, 01:29 AM,
Post: #2
|
|||
|
|||
RE: Install 10.25" MGU CID on ENTRYNAV2 (G20)
Entrynav2 some ppl didn't manage to make it work with 10.25inch 1440 EVO screen, how about MGU one's?
https://cartechnology.co.uk/showthread.p...825&page=2
|
|||
02-06-2023, 08:09 AM,
Post: #3
|
|||
|
|||
RE: Install 10.25" MGU CID on ENTRYNAV2 (G20)
True, I saw that post though I was unsure what the issue with the G30 was. The 1440_540 resolution should work with Entrynav2 as the APIX2 protocol supports it, so it was probably just coding, or maybe component protection. Not sure how that protection works.
However, the G20 comes with two screens, the 8.8" 1280x480 screen and the 10.25" 1920x720 screen I believe. People were successful in coding MGU HU from 8.8 1280x480 to 10.25" 1920x720, I want to see if I could make it work with EntryNav2. Does anybody have any additional info on the Visteon screen or why I might be getting No Signal? |
|||
03-06-2023, 08:21 AM,
Post: #4
|
|||
|
|||
RE: Install 10.25" MGU CID on ENTRYNAV2 (G20)
Might the video cable be the problem?
Maybe it doesn’t give enough voltage through. |
|||
03-06-2023, 11:47 AM,
Post: #5
|
|||
|
|||
RE: Install 10.25" MGU CID on ENTRYNAV2 (G20)
Entrynav2 didnt work with 1440_540, 1920_720 resolution
|
|||
03-06-2023, 18:46 PM,
Post: #6
|
|||
|
|||
RE: Install 10.25" MGU CID on ENTRYNAV2 (G20)
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content