[jaramillo]

Hello all,

I was making a key for cas4 (F25).
Was updating that module but fail with a swfl file multiple times, so I dediced to get the cas at bench, took out plastic cover and found a can filter emu for km...
At the end I finished cloning that cas to an other one, so I need to recover cas, because one electronic component was removed from the board
Im not an electronic expert.
My main objective is to get some help to identify the missing component I must install again

Enclosed is a photo showing the missing component

Thanks

[cipi gutuie]

jaramillo pid='625683' dateline='1687572830']Hello all,

I was making a key for cas4 (F25).
Was updating that module but fail with a swfl file multiple times, so I dediced to get the cas at bench, took out plastic cover and found a can filter emu for km...
At the end I finished cloning that cas to an other one, so I need to recover cas, because one electronic component was removed from the board
Im not an electronic expert.
My main objective is to get some help to identify the missing component I must install again

Enclosed is a photo showing the missing component

Thanks

Just make 2 bridge on board

[brag288]

Hello all,

I was making a key for cas4 (F25).
Was updating that module but fail with a swfl file multiple times, so I dediced to get the cas at bench, took out plastic cover and found a can filter emu for km...
At the end I finished cloning that cas to an other one, so I need to recover cas, because one electronic component was removed from the board
Im not an electronic expert.
My main objective is to get some help to identify the missing component I must install again

Enclosed is a photo showing the missing component

Thanks

One more reason to do all on bench with programmer.
That is a can filter,just bridge the pads as mentioned above and all good

[jaramillo]

Thanks all for the response. all was solved, cas back to life