Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

no communication with icom next OEM
27-06-2023, 20:05 PM,
Post: #5
RE: no communication with icom next OEM
Does LAN LED on computer side light up when you connect this ICOM? If LAN LED is not lit that means there is NO ethernet link. Or LED is faulty. So if it is not lit on other side too that definitely means no lowest level link.

So if you tried connecting another computer and two computers LEDs are not lit that means ICOM's hardware is faulty. IMHO practically NO chance then that firmware restoration would change anything... Because that link is usually established by ethernet hardware without any participation of software.
Quote this message in a reply


Messages In This Thread
no communication with icom next OEM - by A-BAYERS - 27-06-2023, 19:05 PM
RE: no communication with icom next OEM - by Node - 27-06-2023, 20:05 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  [MEGA] ESYS + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 111 37,424 15-05-2024, 09:05 AM
Last Post: bm92
  ICOM resetting with 4.47 mcrussell 7 346 15-05-2024, 06:59 AM
Last Post: Node
  How to use ICOM with BMW VirtualGT1 qeen 0 110 09-05-2024, 18:55 PM
Last Post: qeen
XZBMW G01 - lost communication with DSC but it's working Krysiaman 3 98 29-04-2024, 14:31 PM
Last Post: Krysiaman
XZBMW ICOM Firmware (NEXT & A2) always current! Vojno 206 44,158 12-04-2024, 23:36 PM
Last Post: bennymx
XZBMW Poor wifi signal from new ICOM's bmchicago 3 363 12-04-2024, 18:55 PM
Last Post: Node
  Solved ✔ ICOM NEXT Error bmwcare 4 2,544 01-04-2024, 11:34 AM
Last Post: ivanp
  CCC flash WINKFP ICOM BimmerSLO 9 411 29-03-2024, 19:17 PM
Last Post: Hoborg
XZBMW BMW F10 no FlexRay communication at all. poki123 5 437 25-03-2024, 00:56 AM
Last Post: armenh7
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 4,560 24-03-2024, 11:29 AM
Last Post: Twointje

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content