[Arcticmoon]

Hi guys, need help with atm retrofit. Have f32 with tcb, retrofit evo + atm t2-ece-4g, swap esim from tcb to atm. Sim is working all is ok, but atm can't update cuz doesn't receive ip address from network. Here is command result, as u can see, field  STAT_IP_ADRESSE_TEXT is missing. Also in ISTA national market version not defined. Any ideas how fix this ? 
apiJob("ATM","status_lesen","ARG;LAST_CONNECTION_TEL","")

Satz : 0
  OBJECT                          = atm
  SAETZE                          = 1
  JOBNAME                        = status_lesen
  VARIANTE                        = ATM
  JOBSTATUS                      =
  UBATTCURRENT                    = -1
  UBATTHISTORY                    = -1
  IGNITIONCURRENT                = -1
  IGNITIONHISTORY                = -1
Satz : 1
  JOB_STATUS                      = OKAY
  _REQUEST                        = 3 Bytes
    0000 : 22 D0 35                                          "?5
  _RESPONSE                      = 12 Bytes
    0000 : 62 D0 35 04 00 32 35 30  30 30 31 35              b?5..250  0015
  STAT_SIM_STATUS                = 4          00 00 00 04  ....                 
  STAT_IP_ADRESSE_TEXT            =
  STAT_AKTUELLES_NETZ_TEXT        = 250001
  STAT_SIGNAL_STAERKE_TEXT        = 5
  STAT_IP_ADRESSE_EINH            = TEXT
  STAT_IP_ADRESSE_INFO            = IP-Adresse z.B. 192.168.0.1
  STAT_SIM_STATUS_EINH            = 0-n
  STAT_SIM_STATUS_INFO            = Status der SIM-Karte
  STAT_SIM_STATUS_TEXT            = eingebucht und roaming
  STAT_AKTUELLES_NETZ_EINH        = TEXT
  STAT_AKTUELLES_NETZ_INFO        = Status des aktuell verfьgbaren Netzwerks 000 000 = NMCC NMNC Nmcc= network mobile country code (Land) Nmnc= network mobile network code (Network provider)
  STAT_SIGNAL_STAERKE_EINH        = TEXT
  STAT_SIGNAL_STAERKE_INFO        = Empfangsstдrke des verfьgbaren Netzwerks im Bereich von 0-5 0 = kein Signal 5 = volles Signal

[bimerde]

try coding in evo 'CONFIG_INDEX' to config_table_2 or 1

[SkeYT]

If your TCB is 3G then you must change with FDL in ATM network from 4G to 3G

[Arcticmoon]

If your TCB is 3G then you must change with FDL in ATM network from 4G to 3G

You were right, indeed changing 4g to 3g helped in my situation. What baffled me was that I didn't have these problems on my second car. The swapped SIM card from BMW F06 2015/07 works on the 4G network without any problems.
Solution of problem: 
FDL code ATM 3000 OFF_BOARD, DPAS = 5_ATM_DPAS_1.1_PROD_3G = 05

[user_530d]

You will find different esim cards on tcb. With or without 4G possibility.

[Thorsten]

You will find different esim cards on tcb. With or without 4G possibility.

Is there a way to find out on TCB, if the ESIM would be 4G compatible?


Thorsten

[Napas]

its working fine on my side, esim transfer from 3g tcb to 4g atm, I have F11 LCI 2015