ATTENTION !! Users which have not any posts were deleted !
  1. File Service

  2. MOD-FILES

  3. Powerlab

  4. HEXPROG



FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
20-01-2016, 20:18 PM,
Post: #21
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
I played more with the device and I have successfully flashed the NXP chip with Flash Magic 9.20 from this post. http://cartechnology.co.uk/showthread.ph...7#pid82077

I was scared to try with Flash Magic because it doesn't have a way to identify or read.
I used the same settings as I would use with the Philips Flash Utility: Full erase, verification, etc.

I applied the eeprom and ept from this thread's pack, and all is working well!


   


A big thanks to fantomel nod




Still no luck with the Philips flash utility. Oh well.
Quote this message in a reply
[-] The following 7 users say Thank You to Enabled for this post:
  • banoo, banoo, banoo, Erkanas, mexanico1971, mexanico1971, mexanico1971
28-01-2016, 14:49 PM,
Post: #22
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Does Galletto support to remap honda GD8 and GD3?
Thanks in advanced

yes I love you All handshake
thumbsup thumbsup thumbsup
Quote this message in a reply
[-] The following 1 user says Thank You to meiguang for this post:
  • BS68
30-01-2016, 13:17 PM,
Post: #23
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Hello guys program 0386 function for no rework pcb?
Quote this message in a reply
10-03-2016, 16:00 PM,
Post: #24
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
I upgraded from 0386 to 0475. flash ok
I used mprog and fwrite. 0475 installed no time back.
The program starts, but all the buttons are gray.
nothing is active. I deleted and installed the drivers.

I repeated the FW flash, 5 times. anything.
can you help me? CRP is disabled.

help me please
Quote this message in a reply
07-04-2016, 08:44 AM,
Post: #25
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
This package contain a activation ?
my tool is blocked for data lost at 2012..
Quote this message in a reply
07-04-2016, 13:40 PM,
Post: #26
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
(28-06-2015, 11:28 AM)fantomel Wrote:  FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386

What you can find here:

1.For tool number 0386: ept file,fix file,hex dump and 2 versions of programs V54 used for it, the one from china and the AES November software.

2.For tool number 0475: ept file,fix file, hex dumps made from my tool and program V54 for it that does not need time back.

3.For both tools you have here how to connect to it, how to read firmware movie, how to write dump that you wish.

Reading and writing the mcu for this tool can be done with old Philips LPC 2000 software and USB-TTL adapter, preferd the one that uses PL2303 chipset. You need also a jumper in position to do that.
If you want to check CRP level of your NXP LPC2119 mcu you can do that with FlashMagic and USB-TTL adapter.
[Image: 11h73sz.jpg]

Password: fantomelfree4galletto
Enjoy.

hello I want to put the FGTECH 0475 version but you can write with the programmer J-link? thanks
Quote this message in a reply
15-05-2016, 13:49 PM,
Post: #27
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
I have low voltage problem how to solve this problem ?
Quote this message in a reply
21-05-2016, 17:14 PM,
Post: #28
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Hi,

the guys who did the upgrade, can you tell us the real advantages and/or differences after and before upgrade?

Thanks
Quote this message in a reply
22-05-2016, 00:20 AM, (This post was last modified: 18-04-2017, 15:44 PM by Clusters.)
Post: #29
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
(21-05-2016, 17:14 PM)mauroxj Wrote:  Hi,

the guys who did the upgrade, can you tell us the real advantages and/or differences after and before upgrade?

Thanks

The 0386 version of the program has a modification that forces a rollback on your PC's clock in order to work properly. Quite annoying.

The 0475 doesn't seem to be perfect either, as I have to run the program twice for it to work. Run it once and the program doesn't have the buttons available (gray buttons). I exit and run the program again and then it all works properly. Maybe it's because I haven't yet reworked mine, who knows.
Quote this message in a reply
[-] The following 3 users say Thank You to Enabled for this post:
  • mauroxj, mauroxj, mauroxj
22-05-2016, 18:52 PM,
Post: #30
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Can i read and write with upa or xprog ???
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  FGTech stop working this year 2021 zmann 14 1,135 10 hours ago
Last Post: zmann
KOpel Astra g delco delphi hsfi 2.1 pin code from ecu dump autogaskomotini 4 456 13-04-2021, 14:58 PM
Last Post: Redash
  mec 940 040 nissan juke dump BoNzO 0 105 25-03-2021, 09:52 AM
Last Post: BoNzO
LFord ori dump for SMax 2.0 tdci jawjan 3 210 12-03-2021, 08:25 AM
Last Post: pyvotel
  Solved ✔ SID208, Peugeot Boxer, maybe original dump bmw080 2 221 07-03-2021, 11:14 AM
Last Post: bmw080
YTMercedes a class w168 virgin dump sosinfo 1 176 01-03-2021, 10:00 AM
Last Post: mercis
KOpel Galletto v54 Opel Corsa C 1.2 ME 7.6.2 mirceandrei14 4 989 27-02-2021, 19:45 PM
Last Post: KicOPC
  FGTech galletto 4 MPC5xx EDC17 software needed Jack69 1 332 16-02-2021, 02:14 AM
Last Post: Mef1st0
  GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 tihiuvek 1 430 22-01-2021, 09:48 AM
Last Post: CmdY53
  fgtech galletto Upgrade OBD2 FW 0475 hitmanre 3 443 10-01-2021, 03:47 AM
Last Post: hitmanre

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content