[____ANGEL___]

there's not on frm3 f series

[Mwahab]

there's not on frm3 f series

Maybe I don’t remember correctly, but i did make it couple of times, not sure its FEM_20 or FRM3 .. i can check at office tomorrow and give you confirmation.

[____ANGEL___]

Fem yes
Frm no

[Tomski]

I have problem with short circuit counter in FEM in F32 for TFL_L
Counter got to 0 and there is no power on pin 5
while using stauskurzschlusscounter abs command with correct arguments
0x03 i get that the limit has been exceeded.
Does anyone has solution or I'm doing something wrong.
I have the headlight currently disconnected

[____ANGEL___]

I have problem with short circuit counter in FEM in F32 for TFL_L
Counter got to 0 and there is no power on pin 5
while using stauskurzschlusscounter abs command with correct arguments
0x03 i get that the limit has been exceeded.
Does anyone has solution or I'm doing something wrong.
I have the headlight currently disconnected

Search for init command

[Tomski]

Hi i have tried
Steuern schluessel init
With 0x03 argument and with out


Getting error argument
Any advice?

Found it, i was blind

[____ANGEL___]

Init command about short circuit non about keys

[BimmerLubuskie]

Guys sorry for refreshing BUT, got F25 2012r with FRM3 and cant find Short Circuit Reset when load file by Tool32. Bulb Replaced long time after was broke, and new Bulb not work. How to reset counter or check it on FRM3?

[TheNine90]

look for Kurzschlussreset tool in bmw section

[____ANGEL___]

Will not work on frm3 f series. There's no reset. https://cartechnology.co.uk/showthread.p...#pid594348
in F series works like this, one time for all so anyone will not misunderstood this.

FRM3, AHM_01 and TMS short circuit description
Dealing with short circuits in the footwell module FRM3, trailer module AHM_01 and in the TMS headlight driver module

Monitoring in general: When the light is switched on, a short circuit, open circuit or proper function of an electric circuit may be detected. Detecting and checking a short circuit and make a fault entry takes approximately 10 seconds. Detecting and checking an open circuit and make a fault entry takes approximately 0.5 seconds.

Description of how to deal with short circuits in the footwell module: When a short circuit is detected, the output is switched off until the next time light is requested. After the repair has been carried out, the light must be switched off and on so that the corresponding output is re-activated. This process can be repeated any number of times. No footwell module may be replaced because of this.

Dealing with short circuits in the trailer module: When a short circuit is detected, the output is switched off until the next time light is requested. After the repair has been carried out, the light must be switched off and on so that the corresponding output is re-activated. This process may be repeated 50 times. The fault can then no longer be deleted and the trailer module must be replaced.

Description of how to deal with short circuits in the headlight driver module: When a short circuit is detected, the output is switched off. After a repair has been completed, a terminal change (Terminal 15 > Terminal R > Terminal 30 > Terminal R > Terminal 15) must be performed and the light must be switched on so that the corresponding output can be reactivated. This process can be repeated any number of times. Headlight driver modules may not be replaced because of this.