[vld]

Hello everyone,
i try to retrofit icon adaptive led headlights on F80 LCI.
The car has adaptive led from factory. After the install the headlights i injected cafd in FLE modules and VO code. Retrofit is successful and working well but the old TMS modules are still visible in ISTA. Receiving a no communication error with STMR and STML
(no comunication posible with headlight driver module).
I saw that others had this problem and that the solution is very simple like VO coding with VCM and MSM update enabled in E-sys options to update SVT.
Or generating a TAL for updating the modules that I can execute without a marked module. When generating the TAL I tried with different I-Levels from 17-03-500 and up when generating TMS no longer appear in SVT soll.
I've tried a lot of things everything I can think of and I'm already exhausted....

If anyone has an idea what I'm doing wrong, I'd be happy to hear that there is a solution.

[Siki78]

Write correct svt to vcm.

[vld]

Write correct svt to vcm.

Can you give me some guidance on how to do it correctly?

[laquangksxd]

Write correct svt to vcm.

Can you give me some guidance on how to do it correctly?

1. Read SVT IST then wirte to vcm then check with ISTA. If the problem is not resolved, go to step 2
2. Read FA, save FA, edit FA (Zeitkriterium to 0317) then write FA to VCM.

[Siki78]

Read ecu not vcm and vo code any module or write manually

[vld]

Write correct svt to vcm.

Can you give me some guidance on how to do it correctly?

1. Read SVT IST then wirte to vcm then check with ISTA. If the problem is not resolved, go to step 2
2. Read FA, save FA, edit FA (Zeitkriterium to 0317) then write FA to VCM.

I tried both options but no luck.
I get an error about the wrong ATM bus ID and NBT EVO. I flashed the ATM to see if it would fix the error but to no avail. I am adding a screenshot with the error and a log from the TAL execution. I get the same lines when coding any module. I think that's where my problem lies, I just can't figure out what it is. Tried the newest E-sys as well as the old ones, same thing. 
"MCDDiagService<id=378649, job=com.bmw.psdz.jobs.uds.MCD3_ReadF11DataFromMSM, service=RC_GET_PARAMETER_N11 - RoutineControll GetParameter N11, description=error: negative response : requestOutOfRange, link=MSM_ETHERNET> [DIAGSERVICE]"

Read ecu not vcm and vo code any module or write manually

I've tried the coding so far, both reading from ECU and reading from VCM, the result is always the same.
When reading SVT IST from VCM, I get the same list of ECUs, only in ISTA it continues to search for TMS.
Tomorrow I will try to recode all the VO modules one by one.

[Siki78]

Can you upload svt_ist and fa?

[vld]

Can you upload svt_ist and fa?

Yes of course:

[Siki78]

You can change time criterium like already said laquangksxd to 0317 and change your ZBE3 with ZBE4.
If needed you can change I level factory to F020-17-03-502

[vld]

Today I finally had time to work on those headlights again.
Finally, the problem was solved by changing the factory level I to F020-17-03-502.

Thanks for help