Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Neck warmer retrofit
01-04-2024, 05:55 AM,
Post: #1
|
|||
|
|||
Neck warmer retrofit
Hi all
I was wondering if someone could help me here please. I have retrofitted neck warmers in my F33 but I cannot figure out this issue, its looking like the heater element is faulty but I just want to be 100% before I buy any more parts. I've checked all the wiring and it's fine I've checked the ISTA wiring diagram and it's 100% like for like I just can't see both heating elements being gone although I have brought the seats second hand with no back ground on them. The seats are from a M4 with the control modules they come with being used after I coded them to my car to remove all errors. I just don't know if there are any more cables the M4 seat might require that would not show up on the neck warmer diagram? Maybe a extra ground wire? I can get the fans to kick in with the ISTA test plan but cannot get them to heat up any help with where to look would be appreciated. Thanks Daniel |
|||
01-04-2024, 09:47 AM,
Post: #2
|
|||
|
|||
RE: Neck warmer retrofit
It's a simple PTC heating element, why don't you just measure the resistance of the heating element?
|
|||
01-04-2024, 10:20 AM,
Post: #3
|
|||
|
|||
RE: Neck warmer retrofit
|
|||
14-04-2024, 12:32 PM,
Post: #4
|
|||
|
|||
RE: Neck warmer retrofit
(01-04-2024, 10:20 AM)Just2fast5 Wrote:(01-04-2024, 09:47 AM)user0086 Wrote: It's a simple PTC heating element, why don't you just measure the resistance of the heating element? It's wirring problem. Ground |
|||
16-04-2024, 20:27 PM,
Post: #5
|
|||
|
|||
RE: Neck warmer retrofit
Hi there
Thanks for your reply, what makes you say it's the ground? Reason I ask is because I have checked these and they seem to be fine but is there anything else I need to check to make sure? Thanks Daniel It's wirring problem. Ground [/quote] |
|||
17-04-2024, 11:20 AM,
Post: #6
|
|||
|
|||
RE: Neck warmer retrofit
Just measure the resistance of the heater with a decent multimeter. This is simple just look at the wiring schematics on ista that you're already using. If there is open circuit (no resistance) the element need replacing or fixing.
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,442 |
26-04-2024, 08:06 AM Last Post: smilo |
|
Kafas issue aftrer ACC Retrofit | It3_Magic | 14 | 616 |
23-04-2024, 07:44 AM Last Post: It3_Magic |
|
G82 rear tail lights CSL retrofit | Sauron | 10 | 794 |
20-04-2024, 07:35 AM Last Post: SANYA |
|
BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS | intel123 | 891 | 467,873 |
20-04-2024, 01:05 AM Last Post: fe7565 |
|
ID4 evo to ID6 Evo full retrofit, ATM issues 03178A | mitch32 | 1 | 191 |
15-04-2024, 17:52 PM Last Post: mitch32 |
|
BMW E84 Cruise control retrofit not workig | Alyn546 | 4 | 223 |
12-04-2024, 14:23 PM Last Post: DieStream |
|
F10 FLA retrofit | beng2k | 30 | 1,049 |
11-04-2024, 18:43 PM Last Post: beng2k |
|
BMW f20 KOMBI2 retrofit | bm92 | 15 | 523 |
10-04-2024, 07:51 AM Last Post: bm92 |
|
Car Systems / Custom Retrofit Garage ENBT Adapter | Ulsmak | 39 | 2,089 |
02-04-2024, 08:25 AM Last Post: painsage |
|
E60 NBT Evo retrofit ZBE3 to ZBE4 | painsage | 7 | 270 |
31-03-2024, 18:35 PM Last Post: painsage |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content