Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ECU replace Laguna 2
27-08-2015, 12:52 PM,
Post: #1
|
|||
|
|||
ECU replace Laguna 2
Hello,
ECU S2000RPM in Renault Laguna 2, canclip shows error DF038, - ECU def. I purchased second hand ECU to replace original one. Is it possible to read with canclip the EEPROM in old ECU and write dump to next ECU (with canclip)? Or is it possible to make new ECU IMMO-OFF with canclip? Or I only can to replace the EEPROM chip 95080 in new ECU by original one? Please advise . |
|||
27-08-2015, 14:28 PM,
Post: #2
|
|||
|
|||
RE: ECU replace Laguna 2
(27-08-2015, 12:52 PM)Gigan Wrote: Hello,Swap the eeprom and the flash Envoyé de mon ASUS_T00J en utilisant Tapatalk Dpf,AdBlue,Egr,Dtc,Tuning. Full solution for KESS, K-TAG and TRASDATA, K-tag upg fr fw: 5.001 to fw: 6.070 Including Trasdata / Kess v2 upg fr fw: 3.099 to fw: 4.036 Service files 100% guaranteed available
|
|||
27-08-2015, 14:31 PM,
Post: #3
|
|||
|
|||
RE: ECU replace Laguna 2
Yes, it is so simple, swap eeprom 95080 from your original ecu to the second hand ecu and this is all.
By the way, CAN-Clip is no use in your case, it is no help at all. Swap eeprom, 100% correct, don`t bother with Clip, it is for simple diag jobs not complicated as reprogs and stuff ! |
|||
28-08-2015, 06:40 AM,
Post: #4
|
|||
|
|||
RE: ECU replace Laguna 2
(27-08-2015, 14:28 PM)psavw Wrote: Swap the eeprom and the flashThank you. (27-08-2015, 14:31 PM)alfabit Wrote: Yes, it is so simple, swap eeprom 95080 from your original ecu to the second hand ecu and this is all. Thank you alfabit, I have to swap only eeprom? The flash is not necessary to swap? |
|||
28-08-2015, 06:55 AM,
Post: #5
|
|||
|
|||
RE: ECU replace Laguna 2
Yes, only eeprom must swap, the keycode are written to it, eeprom 95080.
The flash is for injection maps, you keep the original of your car, it`s the best. |
|||
29-08-2015, 07:22 AM,
Post: #6
|
|||
|
|||
RE: ECU replace Laguna 2
Hi
if you have the ddt2000 renault software with simple kkl adapter you can write and change the vin number on the new ecu to your own vehicle vin. and then do with renault clip programming of the cards again. that the best way i think to use a renault used ecu. |
|||
29-08-2015, 08:42 AM,
Post: #7
|
|||
|
|||
RE: ECU replace Laguna 2
DDT2000 can NOT change VIN for the ecu, it shows it, ok, calculate CRC for VIN can`t be changed.
Tested by me on many types of ecus, ( siruis32, ems3132, dcu3r, ddcr , dcm12 ...) Only manual change in eeprom, CRC calculated by DDT. And VIN is in the eeprom, swapping it from the old ecu as we advised him keeps original VIN ( correct ) from the car. |
|||
29-08-2015, 14:53 PM,
Post: #8
|
|||
|
|||
RE: ECU replace Laguna 2
Don't say that if you don't know with which tool i have did it.
try to use agv4000 obd diag on can. it's works perfect for 60% of the ecus on ddt2000. its do every thing except reprogramming and new ecus. http://www.obd2-shop.eu/obddiagagv4000bl...anguage=en |
|||
13-09-2015, 11:48 AM,
Post: #9
|
|||
|
|||
RE: ECU replace Laguna 2
|