Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW CCC does not work
25-03-2016, 04:23 AM,
Post: #1
|
|||
|
|||
BMW CCC does not work
I have two BMW Professional CCC LCI (HW 12.5), one CCC constantly resets and resets, ista-d does not see modules CCC-BO, CCC-ASKA, CCC-ANT, only available CCC-GW
second CCC working OK, I have a request: someone tell me what eprom/flash i must reading? I found information 29f400,ST269,24c64 + BGA flash chips 4xRC28F128J3C or 2xRC28F256J3C + Nand flash 2x K9F5608? |
|||
25-03-2016, 08:45 AM,
Post: #2
|
|||
|
|||
RE: BMW CCC does not work
Need Tool32,CCC GW.prg
comand steuern_bootmode_host,and VXWORKS_FAST restart CCC,Now insert the recovery CD VIM HU_MGU-instruction for esys.
BMW FSC map update/CIC/NBT/NBTevo/EntryNav(Route) BMW FSC retrofit full set: CIC/NBT/NBTevo id4/5/6 screen mirroring Changing region map for EVO id 4/5/6+FullScreen apple carplay |
|||
25-03-2016, 14:18 PM,
Post: #3
|
|||
|
|||
RE: BMW CCC does not work
Hi mate, it's not that easy only programming on the table restores life CCC
|
|||
25-03-2016, 15:03 PM,
Post: #4
|
|||
|
|||
RE: BMW CCC does not work
|
|||
25-03-2016, 15:38 PM,
Post: #5
|
|||
|
|||
RE: BMW CCC does not work
Read first post.
|
|||
25-03-2016, 18:51 PM,
Post: #6
|
|||
|
|||
RE: BMW CCC does not work
This is a common problem on CCC.
Use recovery CD or resolder all IC with hot air station and if you have luck then all be OK. Another way is to change some components but the question is - which - becouse are depend of the problem and is hard to find the right bad component if you have not good equipment. |
|||
25-03-2016, 19:38 PM,
Post: #7
|
|||
|
|||
RE: BMW CCC does not work
Desolder Gateway and write right Data into.
Resolder and see what happend THX and REP will be nice
|
|||
25-03-2016, 20:11 PM,
Post: #8
|
|||
|
|||
RE: BMW CCC does not work
Someone tell me what eprom/flash i must reading?
I can see that these are top secret information Quote:"Desolder Gateway and write right Data into"which element is responsible for this? Can you say more? |
|||
26-03-2016, 05:18 AM,
Post: #9
|
|||
|
|||
RE: BMW CCC does not work
(25-03-2016, 20:11 PM)530d Wrote: Someone tell me what eprom/flash i must reading? GW memory have written soft version on chip, also as I remember engraved "GW......" but if you have unit with GW responding, why you did not try solution given by BMWdriva - it should work. You won't be able to program flash on table in programmer, I don't think you have proper programmer and what most important - proper adapter for BGA memory. GW of course, you will do easy, but if GW is working try bootmode first. |
|||
26-03-2016, 10:03 AM,
Post: #10
|
|||
|
|||
RE: BMW CCC does not work
Hello,
Who have a link for DVD recovery please? Thanks |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content