Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. Martech

  2. ATM - Balkan

    atm balkan file service
  3. Porsche piwis


  5. ProCarDiag


Post Reply 
NCSExpert Unknown Error Help
09-09-2017, 09:45 AM (This post was last modified: 09-09-2017 09:45 AM by inotherwords.)
Post: #21
RE: NCSExpert Unknown Error Help
(09-09-2017 09:33 AM)SweetBMW Wrote:  I was trying to make you understand that there is not a daten issue here. The problem is wrong LM variant.

Lm1 has two completely different versions. Lm2 can be coded from ahl to non ahl.

Lm1 can't.
So he has to replace it with LM2 any version or with LM1 w/o AHL?
Find all posts by this user
Quote this message in a reply
09-09-2017, 09:45 AM
Post: #22
NCSExpert Unknown Error Help
Lm1. Non ahl. Or lm2 any version. Your best bet is to use the correct LM anyway though. And that would be LM 1 non ahl.

Sent from my iPhone using Tapatalk
Find all posts by this user
Quote this message in a reply
09-09-2017, 21:46 PM
Post: #23
RE: NCSExpert Unknown Error Help
(09-09-2017 08:23 AM)inotherwords Wrote:  
(08-09-2017 16:44 PM)Mrg0721 Wrote:  
(08-09-2017 09:13 AM)inotherwords Wrote:  
(07-09-2017 16:34 PM)Mrg0721 Wrote:  Not sure if its of any use but

ZB: 9116260

ECU Family: LM360

Well, that LM is suitable for cars with AHL. You can disable it via coding. It seems your NCS Expert doesn't have SP-Daten files or they are too old.

SP-Daten files are in place and I'm using 62.3
Not sure what could be the problem. The LM module has never been updated though if I'm not mistaken
Post a screenshot of NCS Expert with that error. And yes, LMA was not updated.

Unfortunately I don't have the car here with me so I cannot reproduce the error again.

(09-09-2017 09:21 AM)SweetBMW Wrote:  Just a thought here. If you don't remove 524 from vo. Can you then code LM? If yes. Then datens are not the problem....

That's correct. When I removed 524 from CAS then LM was no longer accessible. When I put 524 back in CAS then all was okay with LM
Find all posts by this user
Quote this message in a reply
09-09-2017, 21:47 PM
Post: #24
NCSExpert Unknown Error Help
Then you have the answer. Swap LM. There is also wiring to be done

Sent from my iPhone using Tapatalk
Find all posts by this user
Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
XZBMW Solved ✔ ISTA/P Error code 25000 in somesz 3 436 20-09-2017 06:38 AM
Last Post: somesz
XZBMW Anyone know why I get an error with ista p? in snypertje 20 1,444 19-09-2017 05:47 AM
Last Post: willisodhiambo
  NBT Error in Rieger 2 148 16-09-2017 23:55 PM
Last Post: Rieger
  E9X airbag module remove error table cluster in Fx82 1 113 16-09-2017 14:26 PM
Last Post: AutoExe3219
XZBMW ISTA-P 3.60 error 94201 63014 technical service initialization failed in pweber84 14 1,143 16-09-2017 13:00 PM
Last Post: bmw335coding
  ICOM NEXT Error in bmwcare 2 299 12-09-2017 13:39 PM
Last Post: bmwcare
0AirBag NBT EVO b140 Flashing fails with CheckMemoryhttp error in Mwahab 53 2,735 09-09-2017 15:49 PM
Last Post: Mwahab
XZBMW F30 2016 ista/p error please help in iyade46 4 297 07-09-2017 17:25 PM
Last Post: iyade46
  Solved ✔ Error CF80 signal from engine management: setpoint-torque request in bmwlover 3 182 03-09-2017 12:22 PM
Last Post: bmwlover
  Solved ✔ E-sys flashing error :( in fl3xy 3 246 01-09-2017 08:17 AM
Last Post: fl3xy

Forum Jump:

User(s) browsing this thread:
1 Guest(s)

Return to TopReturn to Content