Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ODIS 4.2.3 does not recognize VAS6154
08-11-2017, 18:36 PM,
Post: #11
RE: ODIS 4.2.3 does not recognize VAS6154
(08-11-2017, 18:29 PM)apoelistas Wrote:  
(08-11-2017, 18:18 PM)georgia55 Wrote:  Can you tell me how can I do that?

Right hand
Configure
Select your vas
(Try both vas5054a and vas6154)

Change
Select
Change
Something like that
do you mean in device Maneger?
Quote this message in a reply
08-11-2017, 18:55 PM, (This post was last modified: 08-11-2017, 18:57 PM by apoelistas.)
Post: #12
RE: ODIS 4.2.3 does not recognize VAS6154
I did say odis. Did you find the selection???

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
09-11-2017, 00:27 AM,
Post: #13
RE: ODIS 4.2.3 does not recognize VAS6154
(08-11-2017, 15:02 PM)georgia55 Wrote:  I have ordered a VAS 6154 SP308,
Can someone help me?

I bet its not VAS6154. Its a vcx nano inside a VAS6154 looking body.
Quote this message in a reply
09-11-2017, 05:46 AM, (This post was last modified: 09-11-2017, 05:50 AM by apoelistas.)
Post: #14
RE: ODIS 4.2.3 does not recognize VAS6154
(09-11-2017, 00:27 AM)ninja_zx11 Wrote:  
(08-11-2017, 15:02 PM)georgia55 Wrote:  I have ordered a VAS 6154 SP308,
Can someone help me?

I bet its not VAS6154. Its a vcx nano inside a VAS6154 looking body.

Actually it must be a simplified version of vcx nano. Comparing the two vcx nano is more expensive to manufacture. However with vcx nano you need an extender.

It i a passthru device that either is recognised manually as vas5054a or vas6154 in odis configurator.

The problem with these devices because of inability of frmware upgrade downgrade with odis-e (since it is a different device) and maybe due to other hardware limitations it may be not be abe to flash or perform other functions. with odis-s it should work fine. As for geko users it was not checked if it can flash with SVM (odis-s).

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
09-11-2017, 08:05 AM, (This post was last modified: 09-11-2017, 08:23 AM by marour.)
Post: #15
RE: ODIS 4.2.3 does not recognize VAS6154
(09-11-2017, 05:46 AM)apoelistas Wrote:  Actually it must be a simplified version of vcx nano. Comparing the two vcx nano is more expensive to manufacture. However with vcx nano you need an extender.

It i a passthru device that either is recognised manually as vas5054a or vas6154 in odis configurator.

The problem with these devices because of inability of frmware upgrade downgrade with odis-e (since it is a different device) and maybe due to other hardware limitations it may be not be abe to flash or perform other functions. with odis-s it should work fine. As for geko users it was not checked if it can flash with SVM (odis-s).

Hi apoelistas,
So, do you mean J2534 passthru devices can not be used with ODIS-E for flashing?
Thanks,
Quote this message in a reply
09-11-2017, 11:10 AM, (This post was last modified: 09-11-2017, 11:13 AM by apoelistas.)
Post: #16
RE: ODIS 4.2.3 does not recognize VAS6154
With ODIS-E I have my doubts.

VCX nano tested and failed miserably.

Well unless its own app is high tech.

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
[+] 2 users say Thank You to apoelistas for this post
09-11-2017, 14:04 PM,
Post: #17
RE: ODIS 4.2.3 does not recognize VAS6154
I have installed Odis second time and vas5054 selected, still have no connection. which software is for passthru? I want to try with passthru software.
Quote this message in a reply
09-11-2017, 15:11 PM, (This post was last modified: 09-11-2017, 17:10 PM by apoelistas.)
Post: #18
RE: ODIS 4.2.3 does not recognize VAS6154
(09-11-2017, 14:04 PM)georgia55 Wrote:  I have installed Odis second time and vas5054 selected, still have no connection. which software is for passthru? I want to try with passthru software.

try also passthru selection and vas6154. Not sure which one works (it will detect its id)

(The following I hope you have already done: install vci manager, update firmware of vcx6154 from vci manager, and install odis driver update again from vci manager. Press Test did you get a pass??)

If you dont install vci manager your device will not work. I will try to add the link with installation instructions.
vcx6154.txt
File Type: .txt
Downloaded: 70 times
Size: 91 bytes


If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
[+] 3 users say Thank You to apoelistas for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
ZTAudi Latest Odis Service and Engineering for VAS5054 Torrent Without PASS Zenix 20 9,346 3 hours ago
Last Post: Erezbmwm
  Last Odis Version on windows 7 with vas 5054a rochenlebelle 2 481 6 hours ago
Last Post: champagnecharly
0Scope ODIS-Service 7.2.1 Postsetup 4220 (test) Tadk 1,067 102,409 Yesterday, 01:49 AM
Last Post: tu329
ZSeat Odis Engineering 14.1.0 + Activations justdiag 538 62,094 25-04-2024, 20:57 PM
Last Post: Mastahh
  ODIS-Service_update_23_0_1-EU_20240418_Postsetup_230001.105.1350_test Tadk 317 19,868 25-04-2024, 18:23 PM
Last Post: Gecon
Lamborghini ODIS Service 23.2.2 + Activations justdiag 64 4,742 25-04-2024, 15:24 PM
Last Post: billyleon
ZBentley ODIS Service 11.0.1 + Activations justdiag 110 9,844 24-04-2024, 20:37 PM
Last Post: Stig33
00Windows ODIS-Service 6.2.0 Postsetup 4220 (test) Tadk 187 13,634 21-04-2024, 11:27 AM
Last Post: Tomey
  ODIS engineering passthru install sanil 3 179 17-04-2024, 20:20 PM
Last Post: vagvag
0Scope ODIS-Engineering 12.2 Postsetup 1060 (test) Tadk 263 34,464 14-04-2024, 07:56 AM
Last Post: RitterDussel

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content