Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ SD CONECT C4 FAILED
06-02-2019, 15:11 PM,
(This post was last modified: 11-02-2019, 03:54 AM by Clusters.)
Post: #1
|
|||
|
|||
SD CONECT C4 FAILED
sd connect c4 fail . wont connect to car error DAS fault (1.2)-2.503.13011. this happens when i diagnosis w221 ,the car battery low . after i change new battery i diagnosis back it won't communicate with car. i suspect the software and change another hard disk because i have 2 hard disk with xentry has been used before, now the 2 also same .use toolkit to communicate with c4 ok . before this happen i install dts monoco v8 is it this can corrupted sd c4 firmware .
can some one can please help me thanks |
|||
06-02-2019, 15:40 PM,
Post: #2
|
|||
|
|||
RE: SD CONECT C4 FAILED
(06-02-2019, 15:11 PM)counder2000 Wrote: sd connect c4 fail . wont connect to car error DAS fault (1.2)-2.503.13011. this happens when i diagnosis w221 ,the car battery low . after i change new battery i diagnosis back it won't communicate with car. i suspect the software and change another hard disk because i have 2 hard disk with xentry has been used before, now the 2 also same .use toolkit to communicate with c4 ok . before this happen i install dts monoco v8 is it this can corrupted sd c4 firmware . Have tried to update it? |
|||
06-02-2019, 17:03 PM,
Post: #3
|
|||
|
|||
RE: SD CONECT C4 FAILED
How is C4 connected; via WiFi or the green cable?
One should describe in detail the problem, so that each question detail does not have to be pulled from the nose. |
|||
07-02-2019, 00:58 AM,
(This post was last modified: 07-02-2019, 01:00 AM by counder2000.)
Post: #4
|
|||
|
|||
RE: SD CONECT C4 FAILED
(06-02-2019, 17:03 PM)[LORD] Wrote: How is C4 connected; via WiFi or the green cable?sorry, by cable. before this happen i had install dts manoco v8 and try to connect with sdconect by cable but cannot. so i uninstall it . is it make my sdconnect firmware corrupted or hardware problem (06-02-2019, 15:40 PM)MOMOSAM Wrote:i try but could not update it display error low battery(06-02-2019, 15:11 PM)counder2000 Wrote: sd connect c4 fail . wont connect to car error DAS fault (1.2)-2.503.13011. this happens when i diagnosis w221 ,the car battery low . after i change new battery i diagnosis back it won't communicate with car. i suspect the software and change another hard disk because i have 2 hard disk with xentry has been used before, now the 2 also same .use toolkit to communicate with c4 ok . before this happen i install dts monoco v8 is it this can corrupted sd c4 firmware . |
|||
11-02-2019, 03:41 AM,
Post: #5
|
|||
|
|||
RE: SD CONECT C4 FAILED
SOLVED i connect the multiplexer with friend laptop it can communicate with car ok. so I just download GBF and paste to my laptop WOOLO it works.
the problem are with software not the sdconnect thanks to all |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content