[sra]

How to Coding Digital Speedometer in G30 ID6 by ё5у5

please tell me the parameter to coding in dkombi



1.digital speedo
2.KM/H

Many Thank

[hansw0rst]

⚬ Target ECU: DKOMBI2 (or DKOMBI)
⚬ Folder: 3000 Anzeige_Konfiguration
⚬ Primary Parameter: DIGIT_GESCHW_ENABLE
⚬ Set to: anzeige_kmh (forces km/h) or anzeige_akt_pia (links unit to iDrive settings)
⚬ BC Cycle Parameter (if applicable): CB_DIGITAL_GESCHWINDIGKEIT ‭-> set to aktiv
⚬ Speed Buffer (Optional): DIGIT_GESCHW_VERKEHRSRECHTLICH
⚬ aktiv = factory speedometer buffer (+3–5 km/h)
⚬ nicht_aktiv = true/uncorrected speed
⚬ ё_5у5 Target: S15A (connect via VIN using ENET)
⚬ Vehicle State: Triple-press start button without brake to enter dїдgиo5тїc Mode
⚬ Flash Type: Click Code FDL only (never press "Code" directly on the ECU)

[sra]

⚬ Target ECU: DKOMBI2 (or DKOMBI)
⚬ Folder: 3000 Anzeige_Konfiguration
⚬ Primary Parameter: DIGIT_GESCHW_ENABLE
⚬ Set to: anzeige_kmh (forces km/h) or anzeige_akt_pia (links unit to iDrive settings)
⚬ BC Cycle Parameter (if applicable): CB_DIGITAL_GESCHWINDIGKEIT ‭$\rightarrow$‬ set to aktiv
⚬ Speed Buffer (Optional): DIGIT_GESCHW_VERKEHRSRECHTLICH
⚬ aktiv = factory speedometer buffer (+3–5 km/h)
⚬ nicht_aktiv = true/uncorrected speed
⚬ ё_5у5 Target: S15A (connect via VIN using ENET)
⚬ Vehicle State: Triple-press start button without brake to enter dїдgиo5тїc Mode
⚬ Flash Type: Click Code FDL only (never press "Code" directly on the ECU)

Thankkk