[mbenvo]

Hello,

I had problems at first with SWT Patcher, so I decied to use factory certs. Because SWT patcher changed root certs, factory FSC would not work anymore.

I virginized SWT and flashed CIC in F10 to newest software using Esys. ALL SWFL and IBAD flashed no problem. I wrote data by identifier, and coded unit.

I loaded all factory certs, and all are accepted. Tried to load maps, maps loaded no problem, and on restart, navigation is grey.

All certs are accepted. Only problem I can see is SWSigStatus rejected - but I don't understand why. Please let me know if you know how to fix, happy to pay.

Here is status from Esys:

--> GetStatus
<--
RootCertStatus accepted
SWSigStatus rejected
SWTApplications
<--
FSCSCertStatus accepted
FSCStatus accepted
AppNr./UpgrIdx 23(0x17)/1(0x01)
SWTType SWTclassic full
<--
FSCSCertStatus accepted
FSCStatus accepted
AppNr./UpgrIdx 25(0x19)/1(0x01)
SWTType SWTclassic full
<--
FSCSCertStatus accepted
FSCStatus accepted
AppNr./UpgrIdx 27(0x1B)/1(0x01)
SWTType SWTclassic full
<--
FSCSCertStatus accepted
FSCStatus accepted
AppNr./UpgrIdx 111(0x6F)/1(0x01)
SWTType SWTclassic full
<--
FSCSCertStatus accepted
FSCStatus not available
AppNr./UpgrIdx 156(0x9C)/1(0x01)
SWTType SWTclassic full
<--
FSCSCertStatus accepted
FSCStatus not available
AppNr./UpgrIdx 155(0x9B)/1(0x01)
SWTType SWTclassic full
<--
FSCSCertStatus not available
FSCStatus accepted
AppNr./UpgrIdx 45(0x2D)/45(0x2D)
SWTType SWTshort
RoutineResult: OK
<-- ok

[SweetBMW]

How did you make CIC virgin?
Problem is that the sig cert is not accepted and the patched file which “makes the CIC virgin” does more than that. So if you used patcher you must use patched fsc. But also remember to store the sig cert

[mbenvo]

How did you make CIC virgin?
Problem is that the sig cert is not accepted and the patched file which “makes the CIC virgin” does more than that. So if you used patcher you must use patched fsc. But also remember to store the sig cert

How did you make CIC virgin?
Problem is that the sig cert is not accepted and the patched file which “makes the CIC virgin” does more than that. So if you used patcher you must use patched fsc. But also remember to store the sig cert

How did you make CIC virgin?
Problem is that the sig cert is not accepted and the patched file which “makes the CIC virgin” does more than that. So if you used patcher you must use patched fsc. But also remember to store the sig cert

Sig cert should be accepted:
RootCertStatus accepted

Unless the root cert is not the same?

By flashing entire CIC, ALL SWFL were flashed, this would replace all of the certs with the factory data from my understanding.

I virginized before by telnetting into CIC, and deleting the SWT data, and restoring factory original versions. After this all SWT went to not loaded. Then I flashed entire unit.


What is SWSigStatus? This is only thing that is rejected. I did not flash BTLD, I don't think any data for SWT is contained in the bootloader.

Thanks!