Possibly Related Threads…

***atomantmk*** · 12-07-2019, 21:15 PM,

After coding of folding mirrors with NCS light module was dead, I have repaired and everything was back except driver windows, closing and opening from button works but not with fob key when you press long on the key.

Triple turn signal was gone too but I think that I must to look in CIC menu for this option.

I have change master language on CIC to be English UK and language 1 English US, language 2 German and language 3 Spanish but after coding it was just like VO coding.

Do I must to play with VO and change to English?

Here are TRC files from CAS and NFRM, if someone has time to look and tell what is wrong with driver windows?

***Lemta*** · 12-07-2019, 22:29 PM,

That's a horrible situation to be in.

I think the turn signal is linked to the idrive where you have to go and activate it again. Unfortunately I don't have the answers to the other questions but I'm sure someone will along to help.

Just curious, did you have the car running when coding or was it just the ignition on?

***atomantmk*** · (This post was last modified: 13-07-2019, 06:14 AM by atomantmk.)

No, I use always CTEK MXS25 when do coding or programming, it's always 13.5 volts.

***Lemta*** · 13-07-2019, 13:27 PM,

(13-07-2019, 06:12 AM)atomantmk Wrote: No, I use always CTEK MXS25 when do coding or programming, it's always 13.5 volts.

You said you repaired the NFRM module so I take it you didn't replace it? Have you tried to VO code the NFRM module to factory settings and then adding the folding mirror again?

***atomantmk*** · 13-07-2019, 15:29 PM,

Yes, NFRM is VO coded, triple turn signal activate from iDrive and problem with driver window was solved with ISTA initialising power windows, CIC coded with only one language and now is everything okay.
Mirror folding stays for future time.
All problems are now gone!

***warhol2010*** · 24-07-2019, 06:11 AM,

FRM is dead
Fix the FRM

(12-07-2019, 21:15 PM)atomantmk Wrote: After coding of folding mirrors with NCS light module was dead, I have repaired and everything was back except driver windows, closing and opening from button works but not with fob key when you press long on the key.

Triple turn signal was gone too but I think that I must to look in CIC menu for this option.

I have change master language on CIC to be English UK and language 1 English US, language 2 German and language 3 Spanish but after coding it was just like VO coding.

Do I must to play with VO and change to English?

Here are TRC files from CAS and NFRM, if someone has time to look and tell what is wrong with driver windows?

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Bmw f30 xdrive disable coding	hero3838	5	129	5 hours ago Last Post: hero3838
	MGU21 Emmc Writing Problem	donjuan020	0	101	Yesterday, 21:47 PM Last Post: donjuan020
	Secure coding in BMWs (unit list)	Node	88	15,314	Yesterday, 02:05 AM Last Post: champuser-riven
	BMW e87 LCI hralights retrofit problem	XeoN	1	52	31-05-2024, 14:40 PM Last Post: wrp_199
	E39 Rain Light Sensor / Auto Headlight Retrofit Coding	bmw335coding	1	69	31-05-2024, 06:43 AM Last Post: Vojno
	Coding bmw f26 Adaptative LED (FRM) wellcome light angel eyes max bright	ruben_17non	5	421	28-05-2024, 23:07 PM Last Post: ruben_17non
	BMW Lane change assistant Coding	Zenel6GT	4	304	28-05-2024, 17:22 PM Last Post: Zenel6GT
	F25 Hud retrofit with EVO and 6WB kombi coding	simplextibi	0	64	26-05-2024, 15:54 PM Last Post: simplextibi
	G30 Entrynav2 - rear camera retrofit problem	Krysiaman	19	1,401	23-05-2024, 20:39 PM Last Post: Node
	coding drl taillight x3 g1 with esys	kwastmichiel	12	1,408	22-05-2024, 11:57 AM Last Post: Richard_1360

Contact Us