Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
e70 Kafas retrofit --> no initialisation with ECU???
25-02-2022, 07:52 AM,
(This post was last modified: 25-02-2022, 08:01 AM by acolt.)
Post: #1
|
|||
|
|||
e70 Kafas retrofit --> no initialisation with ECU???
hey guys, i have following issue:
e70 preLCI, JBBF3R retroffitted already (from LCI). Now i am adding KAFAS. Windshield changed, cam installed ecu connected like oem. KAFAS is visible on ECU tree BUT! as i start tool32 prg it shows me initialisation error with ecu.... - ncs expert doesnt read it - inpa see ECU, see donor VIN and also AIF (whan doing whole car check) --- doing whole car DTC read, it see 5-9 errors but no KAFAS detailed read... - winkfpt aborts flash because of initialisation error... I have already tried a second ECU, but it is all the same... I have tried to hange PT can lines --> causing disapperaing KAFAS from ecu tree and shorting all units on PTcan i am stuck, what could be the problem??? Missing FRM3? (i dont think so, because for communication it uses JBBF as gateway) UPD: tried WIN10 with ICOM, WIN11 with DCAN... all other modules are readable Whole car read DTC: Yes, ECUS are correct, doublechecked, both are for e/7x (one of them): >> BMW FSC/SFA codes service <<
NCD 2.0 ~ SFA Tokens, FSC, 1AA Region Change ~ MGU1, MGU2, MGU2_2 KAFAS, NiVi, MGU, MRR ~ FSC retrofit codes |
|||
25-02-2022, 16:57 PM,
Post: #2
|
|||
|
|||
RE: e70 Kafas retrofit --> no initialisation with ECU???
Nonne has any info or any idea???
>> BMW FSC/SFA codes service <<
NCD 2.0 ~ SFA Tokens, FSC, 1AA Region Change ~ MGU1, MGU2, MGU2_2 KAFAS, NiVi, MGU, MRR ~ FSC retrofit codes |
|||
25-02-2022, 18:05 PM,
Post: #3
|
|||
|
|||
RE: e70 Kafas retrofit --> no initialisation with ECU???
Hi,
Do you have all the files needed for this module ? (Ediabas,..) Check with total commander. JBBF is ok ? |
|||
25-02-2022, 19:30 PM,
(This post was last modified: 25-02-2022, 19:31 PM by larshutten.)
Post: #4
|
|||
|
|||
RE: e70 Kafas retrofit --> no initialisation with ECU???
Init error from my experience is faulty ediabas.ini what interface are you using? ICOM by hand? Any faults in ecu with ista?
|
|||
25-02-2022, 21:41 PM,
Post: #5
|
|||
|
|||
RE: e70 Kafas retrofit --> no initialisation with ECU???
As I said, whole car is readable, except of kafas.
Used icom and used also dcan >> BMW FSC/SFA codes service <<
NCD 2.0 ~ SFA Tokens, FSC, 1AA Region Change ~ MGU1, MGU2, MGU2_2 KAFAS, NiVi, MGU, MRR ~ FSC retrofit codes |
|||
25-02-2022, 22:25 PM,
Post: #6
|
|||
|
|||
RE: e70 Kafas retrofit --> no initialisation with ECU???
Have you tried a different prg?
|
|||
26-02-2022, 16:17 PM,
(This post was last modified: 26-02-2022, 16:18 PM by Freddy1.)
Post: #7
|
|||
|
|||
RE: e70 Kafas retrofit --> no initialisation with ECU???
There is no other prg as kafas70 if I see it right, or is it TLC_60.prg?. Which JBBF3 version are you using? I remember there was something, if you want to retrofit a E7X camera onto another Exx vehicle, but I´m not sure anymore
|
|||
26-02-2022, 16:41 PM,
Post: #8
|
|||
|
|||
RE: e70 Kafas retrofit --> no initialisation with ECU???
(26-02-2022, 16:17 PM)Freddy1 Wrote: There is no other prg as kafas70 if I see it right, or is it TLC_60.prg?. Which JBBF3 version are you using? I remember there was something, if you want to retrofit a E7X camera onto another Exx vehicle, but I´m not sure anymoreSomething wrong with your kafas70.prg Try copy one from Ista ECU folder to Ediabas\ECU |
|||
26-02-2022, 19:41 PM,
Post: #9
|
|||
|
|||
RE: e70 Kafas retrofit --> no initialisation with ECU???
This control unit is from the e60
|
|||
26-02-2022, 21:24 PM,
Post: #10
|
|||
|
|||
RE: e70 Kafas retrofit --> no initialisation with ECU???
Run ista p. Does it tell you to replace kafas? Part number is correct for e70 but vin is from e60
| BimmerFiks AS | Instagram | F20 114i - Alpine Weiss Retrofits: 609 - 6NS - 6CP - 6WA - 6NW - 674 - - |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content