Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
<< Perfekt Toolbox 0.2b >> e6X/e7X/e8X/e9X Cluster Tool
04-10-2023, 11:53 AM,
Post: #91
|
|||
|
|||
RE: << Perfekt Toolbox 0.2b >> e6X/e7X/e8X/e9X Cluster Tool
(04-10-2023, 09:01 AM)inotherwords Wrote:(04-10-2023, 06:48 AM)xMoses Wrote:(03-09-2023, 14:53 PM)inotherwords Wrote:(03-09-2023, 14:38 PM)xMoses Wrote: 4622 Yes i did, should i calculate the tolerance ? So for display speed 5 km/h higher than the real speed ? |
|||
04-10-2023, 13:51 PM,
Post: #92
|
|||
|
|||
RE: << Perfekt Toolbox 0.2b >> e6X/e7X/e8X/e9X Cluster Tool
(04-10-2023, 11:53 AM)xMoses Wrote: Yes i did, should i calculate the tolerance ? So for display speed 5 km/h higher than the real speed ? It's up to you if you need real or speed with tolerance. I'm not quite sure about how it works, because there's also a coding flag BC_V_KORREKTUR for tolerance, which you can change using NCS. I assume this param just switch between effective/displaying scales, but maybe it works in a different way. |
|||
06-10-2023, 09:36 AM,
Post: #93
|
|||
|
|||
RE: << Perfekt Toolbox 0.2b >> e6X/e7X/e8X/e9X Cluster Tool
(04-10-2023, 13:51 PM)inotherwords Wrote:(04-10-2023, 11:53 AM)xMoses Wrote: Yes i did, should i calculate the tolerance ? So for display speed 5 km/h higher than the real speed ? Yeah, just leave it as it is... Is there a way i can adjust the starting point of the needles ? Setting them manually by hand is such a pain lol |
|||
06-10-2023, 15:39 PM,
Post: #94
|
|||
|
|||
RE: << Perfekt Toolbox 0.2b >> e6X/e7X/e8X/e9X Cluster Tool
With "start position offset", but that´s just to correct the position a little bit, not for big corrections
|
|||
24-10-2023, 09:39 AM,
Post: #95
|
|||
|
|||
RE: << Perfekt Toolbox 0.2b >> e6X/e7X/e8X/e9X Cluster Tool
Hi anyome have the default setting for Perfect ToolBox for instrument cluster bmw e90 lCI 260kmh and 5500rpm Diesel High Cluster...
I have swap the cluster foil faces from mpg to kmh diesel I need for the tachometer and speedmeter I have try it from google but the rpm are not the same,.. and need the default one..thanks |
|||
24-10-2023, 11:03 AM,
Post: #96
|
|||
|
|||
RE: << Perfekt Toolbox 0.2b >> e6X/e7X/e8X/e9X Cluster Tool
(24-10-2023, 09:39 AM)cosmin2012 Wrote: Hi anyome have the default setting for Perfect ToolBox for instrument cluster bmw e90 lCI 260kmh and 5500rpm Diesel High Cluster... Will send you downloadlink as PM. |
|||
17-11-2023, 06:54 AM,
Post: #97
|
|||
|
|||
RE: << Perfekt Toolbox 0.2b >> e6X/e7X/e8X/e9X Cluster Tool
Hello again, i have replace my face dials with one with 330kmh, do you have the default perfekt toolbox settings? I have try many from the google but the nothing works and the speedmeter is not correct when i press test with ( Perfekt Toolbox) at 100kmh shows 80kmh...
My car is bmw e90 lci 320d 184cp THANKS |
|||
17-11-2023, 07:24 AM,
Post: #98
|
|||
|
|||
RE: << Perfekt Toolbox 0.2b >> e6X/e7X/e8X/e9X Cluster Tool
(17-11-2023, 06:54 AM)cosmin2012 Wrote: Hello again, i have replace my face dials with one with 330kmh, do you have the default perfekt toolbox settings? I have try many from the google but the nothing works and the speedmeter is not correct when i press test with ( Perfekt Toolbox) at 100kmh shows 80kmh... There never was an diesel with speedo up to 330kmh so there are no default settings. I have done it on e92 330i or 335i I don´t remember. He put speedometer from M3 E9x. This files I can share if needed .:: Thanks+Rep doesn´t kill anybody ::.
|
|||
17-11-2023, 10:35 AM,
Post: #99
|
|||
|
|||
RE: << Perfekt Toolbox 0.2b >> e6X/e7X/e8X/e9X Cluster Tool
(17-11-2023, 06:54 AM)cosmin2012 Wrote: Hello again, i have replace my face dials with one with 330kmh, do you have the default perfekt toolbox settings? I have try many from the google but the nothing works and the speedmeter is not correct when i press test with ( Perfekt Toolbox) at 100kmh shows 80kmh... It is better to try a real test instead of toolbox test. If the dial layout is not linear, the test won't work correctly. |
|||
17-11-2023, 11:33 AM,
Post: #100
|
|||
|
|||
RE: << Perfekt Toolbox 0.2b >> e6X/e7X/e8X/e9X Cluster Tool
(17-11-2023, 07:24 AM)NeRkO20 Wrote:(17-11-2023, 06:54 AM)cosmin2012 Wrote: Hello again, i have replace my face dials with one with 330kmh, do you have the default perfekt toolbox settings? I have try many from the google but the nothing works and the speedmeter is not correct when i press test with ( Perfekt Toolbox) at 100kmh shows 80kmh... Yes please send me your setting to test it Thanks |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content