[Spirit5676]

The title pretty much says it all is it possible to code G30 start/stop off in ecopro? Coding tcm_msa_memory remembers last setting in comfort, but not in ecopro.

[StarmanBL]

Did you try
Engine OFF, ignition switch is ON, (Diagnostic mode) key fob is in the car

I would code start in Eco Pro, after TCM_MSA_MEMORY
Wert should be set to Wert_01 and Werte=01.... that should solve problem, I think

[Node]

Isn't the whole point of EcoPro to save fuel as much as possible??? And now you want to disable fuel saving measure

[Spirit5676]

Did you try
Engine OFF, ignition switch is ON, (Diagnostic mode) key fob is in the car

I would code start in Eco Pro, after TCM_MSA_MEMORY
Wert should be set to Wert_01 and Werte=01.... that should solve problem, I think

Did a little googling and seems to be possible to code ASS off in ecopro with some F-series, would like to know if this can be coded in G-series aswell.

Isn't the whole point of EcoPro to save fuel as much as possible??? And now you want to disable fuel saving measure

Sure, but since BMW stopped using lead in bearings the bearings won't last as many starts as they used to, which is not a good combination with ASS. In a city you can get several starts in a kilometer with ASS.

[thanhphan1004]

i think imposiba from ECO ,

[Alive006]

hi. Send BDC CAFD

[G1DRO]

Hi. Try to code HU - “ECO_CONF_MSA”, it’s add a checkbox in eco settings