[gt678]

Yes, E-models and F-models have different bus speeds and physical layers.

F-models have 500 kb/s, high speed CAN with 0-2.5 and 2.5-5 V range and need
ID 130 with length 5 and {69, 241, 252, 255, 255, 0, 0, 0} (not HEX) every 500-1000 ms
ID 12F with length 8 and {140, 80, 138, 221, 244, 5, 48, 6} (not HEX) every 500-1000 ms

E-model have 100 kb/s, low speed CAN with 0-5 V range and need
...I actually can´t find, I send it later

If someone needs a program for an Arduino with CAN shield, I wrote a program for it, including a part for infrared remote to switch it on or off or louder, and so on. But for E-models there is no CAN shield ready to buy, that has to be soldered and has different software. So if someone needs it for F or E models, no problem.