Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
TCU vs MULF2 retrofit
21-03-2019, 16:59 PM,
(This post was last modified: 21-03-2019, 17:07 PM by Qwerti.)
Post: #7
|
|||
|
|||
RE: TCU vs MULF2 retrofit
(21-03-2019, 09:22 AM)jararak Wrote: try to reboot CCC, after that, it usualy start work Read FA from cas, and notes is. Close NCS then change setup in ediabas.ini from remote to REMOTE:MOST_ASYNC_ab625, and the port from 6801, to 6802. Save and close the ini file. Connect most adapter in glovebox. Open NCS, and add manual your VIN. Than use this prepared FA: E60_#0909*NB31$609$644$6FL$6UD This FA use only MULF coding, and use ncs dummy for bluetooth setup. |
|||
Reputation: +1 - jararak [+1] | |||
« Next Oldest | Next Newest »
|
Messages In This Thread |
TCU vs MULF2 retrofit - by Matthew53 - 18-03-2019, 19:19 PM
RE: TCU vs MULF2 retrofit - by Matthew53 - 18-03-2019, 20:47 PM
RE: TCU vs MULF2 retrofit - by alsamaraee - 20-03-2019, 14:29 PM
RE: TCU vs MULF2 retrofit - by Matthew53 - 20-03-2019, 23:11 PM
RE: TCU vs MULF2 retrofit - by jararak - 21-03-2019, 09:22 AM
RE: TCU vs MULF2 retrofit - by Matthew53 - 21-03-2019, 15:13 PM
RE: TCU vs MULF2 retrofit - by jararak - 21-03-2019, 18:44 PM
RE: TCU vs MULF2 retrofit - by Matthew53 - 21-03-2019, 20:49 PM
RE: TCU vs MULF2 retrofit - by Qwerti - 21-03-2019, 23:21 PM
RE: TCU vs MULF2 retrofit - by Matthew53 - 21-03-2019, 23:46 PM
RE: TCU vs MULF2 retrofit - by Qwerti - 21-03-2019, 16:59 PM
RE: TCU vs MULF2 retrofit - by jararak - 23-03-2019, 07:12 AM
RE: TCU vs MULF2 retrofit - by Matthew53 - 23-03-2019, 13:44 PM
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content