[dncomputech]

if you want full control then you need to make proper retrofit with button , coding works only if F10 to have the HBA auto on as soon as the auto lights is triggered too .

if there is no 522 then there is no Xenon , 90% chance that HBA wont work even you retrofit it 100% as OEM .

and the picture you posted of the car FA , car has LED fog lights but nothing mentioned about 522 at least . 522 is monetary for HBA to work as far as I know . maybe I am totally wrong

Thank you very much. You are not wrong.
But I'm 99.99% sure when I buy the FA car I don't have 522/552.But I have Xenon Light and it's automatic when the light is low.
Fa Factory and FA present
https://drive.google.com/file/d/1IcCeOXN...sp=sharing
 
Each shadow is 01 (outside the big light) and works near and far away , while the small shadow does not work, it only takes shape (no shadow in it).
Right lamp
https://drive.google.com/file/d/12hF8z29...sp=sharing
https://drive.google.com/file/d/1WYcHuPw...sp=sharing
https://drive.google.com/file/d/1vZPYh85...sp=sharing
https://drive.google.com/file/d/1VLcKELL...sp=sharing
Left lamp
https://drive.google.com/file/d/1cY28bjh...sp=sharing
https://drive.google.com/file/d/1avzB4qO...sp=sharing
https://drive.google.com/file/d/1cYIIEew...sp=sharing
https://drive.google.com/file/d/1dH-Ldhr...sp=sharing

1./. I also have equipped NBTevo (G30) + CID (G11), and RDC works great, but I still keep the factory FA (not changing S606 to S609 and not adding 2VB). I only VO cooding the relevant ECU when retrofitting with my own FA with S609 and 2VB but I don't write it to the car

https://drive.google.com/file/d/1MarfcDN...sp=sharing
https://drive.google.com/file/d/1mOV5eR6...sp=sharing
https://drive.google.com/file/d/1vYLar_g...sp=sharing
https://drive.google.com/file/d/10e70AEA...sp=sharing
2. / When is my car Xenon Light without adaptation? Has anyone successfully equipped HBA (FLA) with Xenon Light without F10 adaptation?