[dncomputech]

These should be the lines that are changed after VO coding. Especially check the FRM.

<<< CAFD_00000014.caf.004_100_010  (JBBFE) >>>
JBBFE > FZM_EnergyDataMemory_FeTra_LIN 3200 > LIN_VARIANTE_INNENSPIEGEL = nicht_aktiv [Default]

<<< CAFD_00000C18.caf.014_082_006  (DSC_Premium) >>>
DSC_Premium > Applikationsparameter 3009 > CCC_CoMPerm = wert_00
DSC_Premium > Applikationsparameter 3009 > CCC_CoMPermDTC = wert_00
DSC_Premium > Applikationsparameter 3009 > CCC_CoPCCC = wert_00
DSC_Premium > Applikationsparameter 3009 > CCC_fLwDyn = wert_00
DSC_Premium > Applikationsparameter 3009 > CCC_MLCay = wert_00
DSC_Premium > Teillisten 3007 > Teilliste_CCC = wert_00

<<< CAFD_0000106D.caf.015_007_010  (FRM__03CT) >>>
FRM__03CT > FRM_AUSSENLICHT_PARAMETER 3050 > FLA_VERBAUT = aktiv
FRM__03CT > LaMaster1 3073 > C_HBA_ENA = F010_disable
FRM__03CT > LaMaster2 3074 > C_HBA_CAM_POS_Z = F010_KafasLow

<<< CAFD_00000069.caf.010_001_210  (KOMBI L6 BO) >>>
KOMBI L6 BO > ERM_Konfiguration 3004 > ST_MAB_ASST_APPL = aktiv
KOMBI L6 BO > ERM_Konfiguration 3004 > ST_MAB_ASST_TIMEOUT = aktiv

Thank you for your help
Previously I did the method to compare CAF with NcdCafdTool by TokenMaster's tool like what you said, but failed.
Should I change the VO Code method to ECU FRM, DSC2, KOMBI, FLA, JBBF, ICM, SZL like what "emhtuning" says
After Vo code, I have checked the file then it's like what NcdCafdTool authored TokenMaster compare, and I Edit 
But I'm still not lucky.
When I sent STV.xml I discovered that in the STV.xml content there are many abnormalities unlike STV.xml in 2018 I saved (Not Retrofit 5AC).
STV.xml I sent you there is an abnormality but Ista + does not report any errors.