Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
G30 Flexray ports will not open!
24-03-2024, 23:11 PM,
(This post was last modified: 24-03-2024, 23:12 PM by armenh7.)
Post: #3
|
|||
|
|||
RE: G30 Flexray ports will not open!
(24-03-2024, 22:40 PM)DEJMIEN Wrote: Only tool32 will be helpful there. First open all ports, then each flexray use the learning procedure, at the end, don't forget to reset the bdc. I mentioned in my original post that I already attempted to open all ports with tool32 via two different commands and neither appear to have worked. What command do I run in tool32 to reset BDC? |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
G30 Flexray ports will not open! - by armenh7 - 24-03-2024, 22:10 PM
RE: G30 Flexray ports will not open! - by DEJMIEN - 24-03-2024, 22:40 PM
RE: G30 Flexray ports will not open! - by armenh7 - 24-03-2024, 23:11 PM
RE: G30 Flexray ports will not open! - by claw - 25-03-2024, 10:38 AM
RE: G30 Flexray ports will not open! - by armenh7 - 25-03-2024, 18:22 PM
RE: G30 Flexray ports will not open! - by Cap_nemo - 25-03-2024, 13:28 PM
RE: G30 Flexray ports will not open! - by Siki78 - 25-03-2024, 18:35 PM
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content