[yoodog]

Ok. I will say once again

IF you have BLANK SCREEN issue - this means that your resolution or size is not set correctly.

If you have NO SIGNAL issue - this means apix1/2 or Comunication MMI/SPI is not set correctly OR SCREEN IS NOT SUPPORTED (like in case of id4 HU and id5 APIX2 screen)

If screen is off, not black/black, and you installed evo screen on NBT, than you should quite this hobby before you damage some thing. Evo screen will not work on NBT without Step UP converter, and only evo id4 screen will work than.

ALL TOUCH SCREENS are id5 and so APIX2, do do not ask if they will work on NBT or NBT EVO id4 (there was one case when evo id4 was able to work with apix2 screen until flashed to id5 SW, fucked up, but true)

Hope that clears all question or at least many. Contact me if need remote assistance, I’m barely ever on forums these days