[simonchs]

HW3.1 all 4gb and all HB2xx are 4gb - you have one of two cases
1. case was changed and actual unit inside is HW 2.3 or older and def HB1xx
2. you are not reading RAM in correct place, please show me your work

Hi, I have a doubt...

Can you tell me if this unit is an ID5 unit? 

It comes from a Mini F56 (May 2017), the code is HB B246 and the hw is 3.1

Thanks!!

Hi yes it is id5/6 capable unit - mini system is a  different but you are correct - can be flashed to be used on bmw as id6 with any screen incl touch screen (it originally comes with mini 8.8 touch screen, have one if needed )

Hi, I have one of these units B246 HW3.1 but it only shows with 2GB of RAM? Does this affect the ID5/6 operation? Is itclikely to experience reboots? I’m just planning the install now.

I read the HU using featureinstaller and also femtoevo. Both say 2GB. Unit is currently being flashed to ID5/6  but I will post an image on completion. But it definitely says B246 and HW 3.1

---

HW3.1 all 4gb and all HB2xx are 4gb - you have one of two cases
1. case was changed and actual unit inside is HW 2.3 or older and def HB1xx
2. you are not reading RAM in correct place, please show me your work

Hi yes it is id5/6 capable unit - mini system is a  different but you are correct - can be flashed to be used on bmw as id6 with any screen incl touch screen (it originally comes with mini 8.8 touch screen, have one if needed )

Hi, I have one of these units B246 HW3.1 but it only shows with 2GB of RAM? Does this affect the ID5/6 operation? Is itclikely to experience reboots? I’m just planning the install now.

I read the HU using featureinstaller and also femtoevo. Both say 2GB. Unit is currently being flashed to ID5/6  but I will post an image on completion. But it definitely says B246 and HW 3.1

So based on the serial number here is it likely that the internals have been swapped on this unit or am I missing something?

HWEL_31DD -> NBTevo ECE FULL OL ID4 Rueko
seems that ID4 unit with 2GB RAM?