[ferrytan25]

Recently i got NBT EVO from my friend, asking to clear V850.
i did clear V850 and Nand using Tool32.

but when i want to flash the unit, it always failed at SWFL_0000271A_006_016_002
failed with both HTTP and UDS

when i take a look at HWEL_00002FC3_001_004_001 i notice that it not supposed to have GPS port.
somebody retrofit the GPS port and changing the adjust block.

i have follow steps to change adjust block, but always failed
i extract the adjustblock using sysetadjread then copy .bin file to USB, edit adjustblock using HU Tool, write it back from HU Tool.

the reason i am not using HU Tool to read adjust block because it always give me error transfering data.

can somebody explain how to write back edited adjust block to NBT EVO using SSH or maybe another method?


here is the error i got when try to flash the unit

MCDDiagService<id=333200, job=com.bmw.psdz.jobs.http.MCD3_PerformECUFlash_Http, service=RC_CHECK_MEMORY_HTTP - RoutineControl CheckMemoryHttp, description=error: positive response with negative content, link=HU_NBT2_63_ETHERNET_63> [DIAGSERVICE]
[HU_NBT2 - 63 - swfl_0000271a-006_016_002] Transaction type: swDeploy; Message: 100% progress on ECUId:HU_NBT2_0x63 [100% of swfl_0000271a-006_016_002] [TRANSACTION]
[] job failed with negative response error:
code: result of the routine control service is not correct
description: service RoutineControl CheckMemoryHttp returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63
severity: FATAL ERROR
[THROWABLE]
[HU_NBT2 - 63 - swfl_0000271a-006_016_002] Transaction type: swDeploy; Message: TA finished [TRANSACTION]
[HU_NBT2 - 63] There was an error during TAL execution, please check the log files. [WARN]
[HU_NBT2 - 63] - [Exception - HU_NBT2 - 63] job failed with negative response error:
code: result of the routine control service is not correct
description: service RoutineControl CheckMemoryHttp returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63
severity: FATAL ERROR

[HU_NBT2 - 63] finalizeECUFlash started [PROGRESS]
[HU_NBT2 - 63] finalizeECUFlash finished [PROGRESS]
[] There was an error, please check the log files. [WARN]
[] - [Exception - HU_NBT2 - 63] job failed with negative response error:
code: result of the routine control service is not correct
description: service RoutineControl CheckMemoryHttp returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63
severity: FATAL ERROR

---

Update:

i have check the DVD and HDD, it's working
i also managed to get DVD and middle board from another unit to flash it, but still got the same error.

i write Adjust Block using HU Tool, but when i checked it again, nothing changed..

i managed to flash another file by excluding 271A from SVT