Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Programming KOMBI and NBT fails on F series
24-03-2016, 23:54 PM,
Post: #61
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Anyone fixed the this problem?
|
|||
25-03-2016, 00:13 AM,
Post: #62
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Fixed long time ago. Use router for programming.
|
|||
25-03-2016, 01:07 AM,
Post: #63
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
|
|||
25-03-2016, 03:55 AM,
Post: #64
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
ICOM and computer must be connected through a router with DHCP server enabled. no direct connection laptop -> icom.
|
|||
25-03-2016, 07:07 AM,
Post: #65
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
(25-03-2016, 03:55 AM)530d Wrote: ICOM and computer must be connected through a router with DHCP server enabled. no direct connection laptop -> icom. You don't have to use a router. But you do need a DHCP server running on the laptop on the ethernet interface. It's pretty easy, 1) Set a static IP on the Ethernet (not wireless) interface - I use 192.168.254.1 2) Install DHCP server (www.dhcpserver.de) 3) Configure DHCP server to listen on the Ethernet interface 4) Click on the buttons to set firewall ports and run as service 5) Connect up your ICOM and it'll get a DHCP address from the DHCP server Then you can program everything without faults. I use this on multiple ISPI laptops and never had an issue and never needed a router to connect the computer and ICOM to. |
|||
Reputation: +2 - 530d [+1] , tigexx [+1] | |||
25-03-2016, 07:25 AM,
Post: #66
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
(25-03-2016, 07:07 AM)dracon Wrote:(25-03-2016, 03:55 AM)530d Wrote: ICOM and computer must be connected through a router with DHCP server enabled. no direct connection laptop -> icom. Thank you very much!!! |
|||
28-03-2016, 00:41 AM,
Post: #67
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
So flashing the whole car with ISTA-P and the ENet Cable together with the emulator should work? Or do I have to use E-Sys for it?
|
|||
01-04-2016, 20:46 PM,
Post: #68
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Today I tried to flash the car with ISTA P 3.58 and ENET Cable.
Everythink worked except the NBT. For NBT it showed "NotExecutable" Anyone know how to solve this? |
|||
01-04-2016, 22:16 PM,
Post: #69
|
|||
|
|||
Programming KOMBI and NBT fails on F series
(01-04-2016, 20:46 PM)Terabyte Wrote: Today I tried to flash the car with ISTA P 3.58 and ENET Cable. Same error happens when you use icom connected to laptop directly, and the easy solution is to use a router between icom and laptop. Now with enet cable I don't know how you would do that, maybe it's possible somehow |
|||
02-04-2016, 17:01 PM,
Post: #70
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
So the problem is the Enet Cable?
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content