[BhdR]

Factory id5 unit without GPS aerial. Everything works except Apple CarPlay. I import FSC 143 and add 6CP then VO code. AppleCar does not appear on the menu. FSC seems accepted.

I solved it

[Emmy]

Have a short question


is there someone of it on the table flash the nbt evo?


if so, then I need help just what the terms setup.

1. can-bridge and nbt evo
2. can-bridge, zgw2 and nbt evo
3. zgw2, cas4 and nbt evo

which is setup properly

[rrdesign]

Have a short question


is there someone of it on the table flash the nbt evo?


if so, then I need help just what the terms setup.

1. can-bridge and nbt evo
2. can-bridge, zgw2 and nbt evo
3. zgw2, cas4 and nbt evo

which is setup properly

4. only zgw2 and evo.

[ruben_17non]

Have a short question


is there someone of it on the table flash the nbt evo?


if so, then I need help just what the terms setup.

1. can-bridge and nbt evo
2. can-bridge, zgw2 and nbt evo
3. zgw2, cas4 and nbt evo

which is setup properly

4. only zgw2 and evo.

Really, you use? can work with "ignition" off? i just look in aliexpress for buy wireset for bench with can bridge.
if can work only with zgw, maybe not buy and save 130€ jejejejjeejje

Ethernet for EVO, you take of 54 pin connector same as OBD ethernet, or take ethernet from 18 pin connector to OABR?

Thanks

[rrdesign]

Have a short question


is there someone of it on the table flash the nbt evo?


if so, then I need help just what the terms setup.

1. can-bridge and nbt evo
2. can-bridge, zgw2 and nbt evo
3. zgw2, cas4 and nbt evo

which is setup properly

4. only zgw2 and evo.

Really, you use? can work with "ignition" off? i just look in aliexpress for buy wireset for bench with can bridge.
if can work only with zgw, maybe not buy and save 130€ jejejejjeejje

Ethernet for EVO, you take of 54 pin connector same as OBD ethernet, or take ethernet from 18 pin connector to OABR?

Thanks

yes works only with zgw. connected to oabr.

[ruben_17non]

OABR from 18pin connector or from big?

[rrdesign]

OABR from 18pin connector or from big?


Enviado desde mi iPhone utilizando Tapatalk

i suggest you to take a closer look at pinning. there is no ethernet on quadlock anymore...

[ruben_17non]

OABR from 18pin connector or from big?


Enviado desde mi iPhone utilizando Tapatalk

i suggest you to take a closer look at pinning. there is no ethernet on quadlock anymore...

yes i know.
i update one evo without issues, just rewire quadlock to OABR, pinout not is problem.
but now i try to update other one, have id5 but very old version, i want update to last.
but allways receive error and not possible update, unit work fine.

i would bought zgw for test program in table.

for example, chinese wire set, take ethernet for quadlock (after is possible rewire to OABR...) but ethernet is taken from big connector of ZGW, this is extrange, because only ethernet of OBD is take of from big connector.

ethernet for quadlock (NBT) or for OABR (EVO) is taken of same pin´s in little connector.


you take OABR from little connector or big? is my big dude, when i look all chinese adapters

for example:


not have little connector for ZGW, so ethernet is taken of BIG, same as OBD ethernet

[rrdesign]

OABR from 18pin connector or from big?


Enviado desde mi iPhone utilizando Tapatalk

i suggest you to take a closer look at pinning. there is no ethernet on quadlock anymore...

yes i know.
i update one evo without issues, just rewire quadlock to OABR, pinout not is problem.
but now i try to update other one, have id5 but very old version, i want update to last.
but allways receive error and not possible update, unit work fine.

i would bought zgw for test program in table.

for example, chinese wire set, take ethernet for quadlock (after is possible rewire to OABR...) but ethernet is taken from big connector of ZGW, this is extrange, because only ethernet of OBD is take of from big connector.

ethernet for quadlock (NBT) or for OABR (EVO) is taken of same pin´s in little connector.


you take OABR from little connector or big? is my big dude, when i look all chinese adapters

for example:


not have little connector for ZGW, so ethernet is taken of BIG, same as OBD ethernet

small connector goes to oabr. big connector to obd / laptop

[BhdR]

OABR from 18pin connector or from big?


Enviado desde mi iPhone utilizando Tapatalk

i suggest you to take a closer look at pinning. there is no ethernet on quadlock anymore...

yes i know.
i update one evo without issues, just rewire quadlock to OABR, pinout not is problem.
but now i try to update other one, have id5 but very old version, i want update to last.
but allways receive error and not possible update, unit work fine.

i would bought zgw for test program in table.

for example, chinese wire set, take ethernet for quadlock (after is possible rewire to OABR...) but ethernet is taken from big connector of ZGW, this is extrange, because only ethernet of OBD is take of from big connector.

ethernet for quadlock (NBT) or for OABR (EVO) is taken of same pin´s in little connector.


you take OABR from little connector or big? is my big dude, when i look all chinese adapters

for example:

not have little connector for ZGW, so ethernet is taken of BIG, same as OBD ethernet

Both are ZGW connection. Little one has ethernet wires.