Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Bmw no start
06-12-2016, 13:39 PM,
(This post was last modified: 03-01-2017, 19:41 PM by Clusters.)
Post: #1
|
|||
|
|||
Bmw no start
Hello everyone, a bmw 525i 2007 was packed in garage for 2years and when owner came the battery was dead so he removed it to charge.now car doesnt start.it cranks the engine but no fuel at injectors.tried to diagnose using WOW i cant find any codes except throttle body not adapted.but when i try to diagnose the CAS it is failling to connect to immobiliser(no communication.please help.
|
|||
06-12-2016, 17:45 PM,
Post: #2
|
|||
|
|||
RE: Bmw no start
You might need to allighn DME/CAS if bensin
or DDE/CAS if diesel because of battery goes flat, the EWS Tampering kicks in |
|||
Reputation: +1 - ROD-BENDERS [+1] | |||
06-12-2016, 19:10 PM,
Post: #3
|
|||
|
|||
RE: Bmw no start
What tool can i use? I have done alot on old ews with carprog it never fail.
|
|||
06-12-2016, 20:48 PM,
Post: #4
|
|||
|
|||
RE: Bmw no start
Have done previously re-align with Launch diagnostic
If I helped you please add *THANKS* + *REP*
Solutions.. Tuning, Deletes, Immo, Crash data, Pin codes & much more! |
|||
Reputation: +1 - ROD-BENDERS [+1] | |||
07-12-2016, 03:54 AM,
Post: #5
|
|||
|
|||
RE: Bmw no start
But is it possible to re allign when the CAS is not communicating
|
|||
07-12-2016, 13:46 PM,
Post: #6
|
|||
|
|||
RE: Bmw no start
|
|||
07-12-2016, 15:09 PM,
Post: #7
|
|||
|
|||
RE: Bmw no start
I cant diagnose the CAS because there is no communication
|
|||
09-12-2016, 09:28 AM,
(This post was last modified: 09-12-2016, 09:31 AM by dieselfuel.)
Post: #8
|
|||
|
|||
RE: Bmw no start
If CAS crached this a problem...
you cant diagnose CAS because it is faulty, or your diagnose tool doesnt reach it I suggest you try with another BMW diagnose tool to be sure before you conclude that CAS is faulty Also check Fuses, wires before you change anything Also if CAS is faulty, you wont hear the motor starting you wont be even be able to switch on ign.... but if you have ign, startmotor turns, then there is a big chance your CAS is Alive... |
|||
09-12-2016, 20:41 PM,
Post: #9
|
|||
|
|||
RE: Bmw no start
Yes the motor turns and all is working fine just no fuel at injectors
|
|||
09-12-2016, 20:52 PM,
Post: #10
|
|||
|
|||
RE: Bmw no start
(09-12-2016, 20:41 PM)spanaz1 Wrote: Yes the motor turns and all is working fine just no fuel at injectors T Hi, in the CAS ECU is a relais for the starter. If the starter is working on clamp 50 the CAS is awake. If no ignition or fuel is provided, the secret exchange between DME and CAS fails. So check your diagnoses software, maybe in most cases you only use the wrong protocoll or cable. CU |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content