Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
[Question] How to use newest ISTA-P without IBAC Codes for F-Series for flashing
|
18-03-2018, 08:00 AM,
(This post was last modified: 18-03-2018, 08:04 AM by M-Simon.)
Post: #1
|
|||
|
|||
|
[Question] How to use newest ISTA-P without IBAC Codes for F-Series for flashing
Hi,
ISTA-P Support for newer models (like F, G and I Series) was discontiniued (last version with full support was 3.63.4). But I heard / and read that newer ISTA-P versions can be still used with IBAC-Code for the affected models. What does that means excatly? There are a lot of tools for generating IBAC-Codes (like ISTA-P Launcher from Beemerboy88) but this codes are only for retrofiting as far as I see. How can I flash the entire car with ISTA-P and IBAC Code / which IBAC Code have to use? I think this is important for users with retrofitted ECUS which should not be flashed in ISTA-P in expert mode. Thank you very much! |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
18-03-2018, 08:29 AM,
(This post was last modified: 18-03-2018, 09:47 AM by Bimmer540.)
Post: #2
|
|||
|
|||
|
RE: [Question] How to use newest ISTA-P without IBAC Codes for F-Series for flashing
From which version of Ista-p is IBAC Code requested?
|
|||
|
|
|
18-03-2018, 08:36 AM,
Post: #3
|
|||
|
|||
|
RE: [Question] How to use newest ISTA-P without IBAC Codes for F-Series for flashing
ISTA-P will give you the order code, for example 001D.
Then generate the IBAC. |
|||
|
|
|
18-03-2018, 09:33 AM,
Post: #4
|
|||
|
|||
|
RE: [Question] How to use newest ISTA-P without IBAC Codes for F-Series for flashing
The session can be continued with the IBAC code, retrofitting is no longer available.
|
|||
|
|
|
18-03-2018, 11:42 AM,
Post: #5
|
|||
|
|||
|
RE: [Question] How to use newest ISTA-P without IBAC Codes for F-Series for flashing
@myfirst1er How do you decide / know which key number (5 in your case) is needed?
Thanks again! |
|||
|
|
|
18-03-2018, 14:35 PM,
(This post was last modified: 18-03-2018, 18:47 PM by Jumper.)
Post: #6
|
|||
|
|||
|
RE: [Question] How to use newest ISTA-P without IBAC Codes for F-Series for flashing
|
|||
|
|
|
19-03-2018, 08:23 AM,
Post: #7
|
|||
|
|||
RE: [Question] How to use newest ISTA-P without IBAC Codes for F-Series for flashing
(18-03-2018, 08:00 AM)Munich Simon Wrote: Hi, Two solutions.one is IBAC generator then whole car programming will go on.the other is ISTA with all programming data was installed before. |
|||
|
|
|
19-03-2018, 09:49 AM,
Post: #8
|
|||
|
|||
|
RE: [Question] How to use newest ISTA-P without IBAC Codes for F-Series for flashing
Guys, who can explain it to me, what is the ISTA/P for? I always use E-Sys and just want to understand the importance of ISATA/P
|
|||
|
|
|
25-01-2019, 08:32 AM,
Post: #9
|
|||
|
|||
|
RE: [Question] How to use newest ISTA-P without IBAC Codes for F-Series for flashing
I understand how to generate the IBAC code to enable ISTA-P, but the latest standalone versions do not contain PSDZ. Can I simply inject the PSDZ from the same version into the ISTA-P/BMW/Services/data/ecudata folder to enable ISTA-P for F-series?
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
4 Guest(s)
4 Guest(s)
Return to TopReturn to Content
