Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
cas / cluster bench setup
03-01-2019, 08:43 AM,
(This post was last modified: 03-01-2019, 15:33 PM by Cniksor.)
Post: #61
|
|||
|
|||
RE: cas / cluster bench setup
finished making my harness clean and simple. using all oem connectors, i can make cas2/3 keys, read DME ISN, test keys, test kombi
tested with CGDI and MULTI TOOL, INPA, ISTA, NCSEXPERT. works good, and makes making keys a whole lot easier on bench. made a few keys already, im using with a ELV emulator for CAS that require elv and had no issues, also downgraded CAS with cgdi no issues so far. reading dme using elv emulator |
|||
Reputation: +3 - dil6222 [+1] , Gmmdi911 [+1] , bmwcoder75 [+1] | |||
03-01-2019, 10:17 AM,
(This post was last modified: 03-01-2019, 12:35 PM by Silva1337.)
Post: #62
|
|||
|
|||
RE: cas / cluster bench setup
(03-01-2019, 08:43 AM)Cniksor Wrote: finished making my harness clean and simple. using all oem connectors, i can make cas2/3 keys, read DME ISN, test keys, test kombi hello my bench too working good etc i updated schematics in older post because there was some mistakes, but now without dme/dde connection could you share what i need to connect harness for ecu? is supply for + - ,wkp, and pt can enough?Do i need connect 2 wires to cas?If i want connect dde wiring what about dde relay? |
|||
09-01-2019, 11:01 AM,
(This post was last modified: 09-01-2019, 11:03 AM by jimmy1022.)
Post: #63
|
|||
|
|||
RE: cas / cluster bench setup
Cniksor,
What JBBFE you used with that setup? Mine as above uses the black plug also for kombi and yours looks a lot more tidy without it. |
|||
09-01-2019, 19:33 PM,
Post: #64
|
|||
|
|||
RE: cas / cluster bench setup
Finally got it working! My mistake was that i had two cables to blue connector instead of black connector. Used ista's CAS pinout that pointed me to connector X140271 not X140272. Now it works!
|
|||
09-01-2019, 20:54 PM,
Post: #65
|
|||
|
|||
RE: cas / cluster bench setup
My installation also works 100%. Previously I had no ignition. I changed the CAS + key and added the ELV emulator. Now everything works as it should. Looks like I made the key wrong with the previous CAS. It's still possible to connect the FRM and up-set the installation, because at first sight it looks chaotic.
Greetings to all! |
|||
09-01-2019, 23:08 PM,
Post: #66
|
|||
|
|||
RE: cas / cluster bench setup
Also i update post succesfully added wiring for ecu , i used few signals for cas , pt can , wake up to b+, ofcourse + - its all very simple everything you can check in newtis by ecu type
|
|||
10-01-2019, 09:38 AM,
Post: #67
|
|||
|
|||
RE: cas / cluster bench setup
(09-01-2019, 20:54 PM)Cowboy Wrote: My installation also works 100%. Previously I had no ignition. I changed the CAS + key and added the ELV emulator. Now everything works as it should. Looks like I made the key wrong with the previous CAS. It's still possible to connect the FRM and up-set the installation, because at first sight it looks chaotic. Ignition is my problem but with OBD. My obd does not have pin 1!! I have had to loop it from a wire with 12v from cas. Secondly I notice it goes to sleep after a few minutes UNLESS there is activity at the OBD or connection from INPA, ISTA or whatever. If I can get around that I will be happier. Now I want to add a DME and cluster, then FRM. |
|||
10-01-2019, 17:20 PM,
Post: #68
|
|||
|
|||
RE: cas / cluster bench setup
(10-01-2019, 09:38 AM)willisodhiambo Wrote:(09-01-2019, 20:54 PM)Cowboy Wrote: My installation also works 100%. Previously I had no ignition. I changed the CAS + key and added the ELV emulator. Now everything works as it should. Looks like I made the key wrong with the previous CAS. It's still possible to connect the FRM and up-set the installation, because at first sight it looks chaotic. I used universal female OBD 2 connector. It has all 16 pins. You can use the ones you need. |
|||
10-01-2019, 18:11 PM,
(This post was last modified: 10-01-2019, 18:12 PM by Silva1337.)
Post: #69
|
|||
|
|||
RE: cas / cluster bench setup
There is my with diesel and n62 ecu connectors
|
|||
Reputation: +1 - Gmmdi911 [+1] | |||
10-01-2019, 22:35 PM,
Post: #70
|
|||
|
|||
RE: cas / cluster bench setup
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
CAS4 BENCH SETUP | brahem | 2 | 146 |
11-06-2024, 07:12 AM Last Post: brahem |
|
[Solved] G30 EVO on bench with FEM | World L | 3 | 197 |
04-06-2024, 16:13 PM Last Post: World L |
|
Tool for bench read 8hp | Garryq | 10 | 2,042 |
03-06-2024, 20:05 PM Last Post: Vladica |
|
ID8 with BCP on bench, can't turn on ignition | Matthew53 | 1 | 223 |
23-05-2024, 21:39 PM Last Post: Matthew53 |
|
ESys Launcher PRO Setup 2.8.1 | fengyonghua21 | 414 | 53,462 |
15-05-2024, 18:24 PM Last Post: Pommie |
|
E85 cluster eeprom VIN location | stydly | 3 | 179 |
08-05-2024, 19:47 PM Last Post: gabur431 |
|
mini f60 countryman, mileage issues red dot after cluster replacement | deutsch | 6 | 254 |
08-05-2024, 11:15 AM Last Post: EngineerX |
|
Bmw explorer msd80 isn read out bench? | xMoses | 9 | 867 |
30-04-2024, 01:07 AM Last Post: that4chanhacker |
|
F20 LCI2 black panel cluster coding | sqorpius | 10 | 2,203 |
27-04-2024, 06:51 AM Last Post: hamzettin |
|
Instrument cluster e46 | mapkrk | 2 | 225 |
27-04-2024, 00:33 AM Last Post: mapkrk |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content