Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Nbt Evo Dead After Flashing
16-02-2019, 05:05 AM,
Post: #11
|
|||
|
|||
RE: Nbt Evo Dead After Flashing
Does anything show on the screen? What model of screen are you using?
Also, are you trying to flash in a car? If yes, what car? I've had an evo shut off half way through loading the bootloader, it doesn't actually write the bootloader until the whole thing has been transferred, so the bootloader should still be there, but flashing with a ZGW might be ideal. I've also had a lot of problems with the ethernet port functioning while my e9x nbt emulator is connected, so for flashing I disconnect the emulator and use a ZGW and a usb-can device for sending wakeup signals. |
|||
16-02-2019, 05:45 AM,
Post: #12
|
|||
|
|||
RE: Nbt Evo Dead After Flashing
vilord Thank you
I was flushing with zgw on the bench. When turning on the power again, the screen is a blue screen in the flash mode. Communication with the head unit is confirmed again. |
|||
16-02-2019, 07:45 AM,
Post: #13
|
|||
|
|||
RE: Nbt Evo Dead After Flashing
The problem was solved.
It is now possible to communicate by restarting pc and connecting Ethernet directly to Oh oabr of the head unit. |
|||
27-02-2019, 15:48 PM,
(This post was last modified: 27-02-2019, 15:50 PM by rickynguyen.)
Post: #14
|
|||
|
|||
RE: Nbt Evo Dead After Flashing
(16-02-2019, 07:45 AM)futa Wrote: The problem was solved.My evo got same problem today, can not see it in esys, tool32... after failed flash. |
|||
25-03-2019, 07:17 AM,
Post: #15
|
|||
|
|||
RE: Nbt Evo Dead After Flashing
|
|||
25-03-2019, 08:03 AM,
(This post was last modified: 25-03-2019, 08:04 AM by rickynguyen.)
Post: #16
|
|||
|
|||
RE: Nbt Evo Dead After Flashing
(25-03-2019, 07:17 AM)retrobmwtr Wrote:ethernet from zgw to oabr if you flash it on car.(16-02-2019, 07:45 AM)futa Wrote: The problem was solved. ethernet from enet cable to oabr if you flash it on bench and no need ZGW2 |
|||
25-03-2019, 19:25 PM,
(This post was last modified: 25-03-2019, 19:26 PM by retrobmwtr.)
Post: #17
|
|||
|
|||
RE: Nbt Evo Dead After Flashing
(25-03-2019, 08:03 AM)rickynguyen Wrote:(25-03-2019, 07:17 AM)retrobmwtr Wrote:ethernet from zgw to oabr if you flash it on car.(16-02-2019, 07:45 AM)futa Wrote: The problem was solved. I am on bench then how should be the detailed connection config on esys? i think i will tick connection via gateaway url : 169.254.199.99 : 6801 right ? |
|||
25-03-2019, 19:42 PM,
(This post was last modified: 25-03-2019, 19:42 PM by bmwcoder75.)
Post: #18
|
|||
|
|||
RE: Nbt Evo Dead After Flashing
Quote:ethernet from zgw to oabr if you flash it on car. No wonder why you having so many issues man... |
|||
17-04-2019, 05:55 AM,
Post: #19
|
|||
|
|||
RE: Nbt Evo Dead After Flashing
i have the same problem or NBT HU , so no OBAR port, how to communicate with this dead unit, any suggession ?
|
|||
02-10-2019, 20:44 PM,
Post: #20
|
|||
|
|||
RE: Nbt Evo Dead After Flashing
me too, had a evo with bootloader bricked. some way to recover at bench?
nobody try it? If this post helped you don't forget to press rep and thanks
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
X1 F48 dead DDE MD1CS001 | bm92 | 1 | 216 |
15-05-2024, 09:10 AM Last Post: bm92 |
|
Flashing F26 DME software into F22? | Krysiaman | 4 | 148 |
14-05-2024, 17:40 PM Last Post: ruben_17non |
|
Flashing hybrid cars with E-sys | ravager | 0 | 191 |
18-04-2024, 09:51 AM Last Post: ravager |
|
F48 BDC_Gw dead | qbek90 | 4 | 310 |
30-03-2024, 04:22 AM Last Post: qbek90 |
|
Flashing a stock box map to an E60 with XHP? | GoNz0- | 10 | 493 |
20-03-2024, 09:33 AM Last Post: tomaxsas |
|
ZGW2 dead can be rescued? | walkernight88 | 5 | 418 |
16-03-2024, 21:15 PM Last Post: walkernight88 |
|
flashing modules hw-id | redog4dy | 5 | 403 |
04-03-2024, 13:26 PM Last Post: redog4dy |
|
Power supply for coding flashing | kklobo | 14 | 1,077 |
29-02-2024, 08:37 AM Last Post: nBlacky |
|
problem with flashing CHAMP2 module (the programming dependencies are not correct) | azwgh | 17 | 972 |
11-02-2024, 19:39 PM Last Post: azwgh |
|
CAS 3 need repair after flashing | stydly | 10 | 586 |
02-02-2024, 15:43 PM Last Post: 16eddi67 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content