Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
FRM3 flash with emergency
29-03-2019, 13:30 PM,
Post: #1
|
|||
|
|||
FRM3 flash with emergency
I cannot find the topic anymore, where someone asked/claimed if it is possible to recover totally dead FRM3 only with Emergency flash?
Is that really possible or what? That would save a huge amount of work. |
|||
29-03-2019, 13:34 PM,
Post: #2
|
|||
|
|||
RE: FRM3 flash with emergency
It's not possible. Reflash it by external programmer... that will help you.
read the corrupted dflash... as many times emulated eeprom can be recovered. |
|||
29-03-2019, 13:36 PM,
Post: #3
|
|||
|
|||
RE: FRM3 flash with emergency
(29-03-2019, 13:34 PM)morfej Wrote: It's not possible. Reflash it by external programmer... that will help you. Yes, that I know and I have done that a couple of times with xprog, but someone asked why not with emergency flash. Then the whole topic was dismissed |
|||
29-03-2019, 14:54 PM,
Post: #4
|
|||
|
|||
RE: FRM3 flash with emergency
|
|||
29-03-2019, 20:38 PM,
Post: #5
|
|||
|
|||
RE: FRM3 flash with emergency
It's impossible.
To fix frm you have to fix the corrupted MCU partition, and how it is defined in MCU. |
|||
29-03-2019, 21:16 PM,
Post: #6
|
|||
|
|||
RE: FRM3 flash with emergency
Even if you would be able to re-flash it somehow, it would still not recover the corrupt partition so the problem would still be there.
|
|||
30-03-2019, 08:11 AM,
Post: #7
|
|||
|
|||
RE: FRM3 flash with emergency
Emergency flash still needs an ECU that can communicate, no? If FRM cant communicate, how can it flash
|
|||
01-04-2019, 11:46 AM,
Post: #8
|
|||
|
|||
RE: FRM3 flash with emergency
(30-03-2019, 08:11 AM)willisodhiambo Wrote: Emergency flash still needs an ECU that can communicate, no? If FRM cant communicate, how can it flash I agree with You. So I don't understand why someone succested to use emergency at all. I assume the pinpoints in PCB in FRM3 are allway in the same place. It would be nice if someone could develop jig for FRM3 makeing soldring unnecessary |
|||
01-04-2019, 12:05 PM,
Post: #9
|
|||
|
|||
RE: FRM3 flash with emergency
Use a BDM-like frame with pins and you´re good to go, no need for soldering
|
|||
13-04-2019, 06:45 AM,
Post: #10
|
|||
|
|||
RE: FRM3 flash with emergency
4 wire solder to big solder points aint that bad. On some frm3 versions you still need to scrape off the laquer , no one is that busy
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Flash CAS 3 for disable ELV | UnFan | 4 | 282 |
7 hours ago Last Post: LogiHuś |
|
FRM3 MINI eee solution | ArcziArcz | 4 | 226 |
11-05-2024, 07:58 AM Last Post: Dash_Burner |
|
Frm3 ipo file | hero3838 | 6 | 226 |
07-05-2024, 09:52 AM Last Post: Vadim AA |
|
Hexprog FRM3 Issues | BimmerExperts | 17 | 1,798 |
02-05-2024, 14:55 PM Last Post: sixcode |
|
Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA | FSCmap | 184 | 54,168 |
24-04-2024, 14:49 PM Last Post: Bag3ban1 |
|
Which tools for frm3 and cas3? | liviu2004 | 22 | 1,484 |
20-04-2024, 07:37 AM Last Post: aejanow |
|
TMS FRM3 F10 Coding issue | mj_mj_mj | 17 | 2,151 |
16-04-2024, 09:30 AM Last Post: user_530d |
|
Flash MPPK software 20D B47 (Esys) | ruben_17non | 5 | 633 |
10-04-2024, 21:38 PM Last Post: ruben_17non |
|
BMW G8x M3/M4 CSL EGS flash | weby | 22 | 3,829 |
31-03-2024, 19:48 PM Last Post: Erezbmwm |
|
m2 g87 csl flash | Erezbmwm | 0 | 161 |
31-03-2024, 18:46 PM Last Post: Erezbmwm |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content