[BMWF750GS]

If I change the ABS control unit of the new version, can I upgrade ABSPro

[BMWS1000RR]

Yes, there is an ABS module called type IV. It should be on anything R and RR above July 1 2016. I know the R model was slightly ahead of the RR in the ECU with the 2014 R being BMSX and it was the 2015 RR that got the BMSX. The ABS PRO features were released about the same time for all models effected by this addition. I never read anywhere that there was any upgrade in the lean angle sensor, and it should have been on the R model from 2014 and up.

FSC will only work in ISTA P or + without the correct certs identified by the VIN. These FSC's are only created in the BMWAG system and released to the dealers network via the ISIS.

If you find someone that is willing to create a work order inside the BMWAG system without going to a dealer, please pass their name/ID to me. I would pay for FSC by VIN for other add on's available to the R and RR features.

[Vojno]

I also!
"If you find someone that is willing to create a work order inside the BMWAG system without going to a dealer, please pass their name/ID to me."
I also pay the price, not for free, of course.

[BMWF750GS]

Yes, there is an ABS module called type IV. It should be on anything R and RR above July 1 2016. I know the R model was slightly ahead of the RR in the ECU with the 2014 R being BMSX and it was the 2015 RR that got the BMSX. The ABS PRO features were released about the same time for all models effected by this addition. I never read anywhere that there was any upgrade in the lean angle sensor,  and it should have been on the R model from 2014 and up.

FSC will only work in ISTA P or + without the correct certs identified by the VIN. These FSC's are only created in the BMWAG system and released to the dealers network via the ISIS.

If you find someone that is willing to create a work order inside the BMWAG system without going to a dealer, please pass their name/ID to me. I would pay for FSC by VIN for other add on's available to the R and RR features.

oh,I see! thanks a lot！！

[aloxo]

FSC code can order via asap !

[BMWF750GS]

Yes, there is an ABS module called type IV. It should be on anything R and RR above July 1 2016. I know the R model was slightly ahead of the RR in the ECU with the 2014 R being BMSX and it was the 2015 RR that got the BMSX. The ABS PRO features were released about the same time for all models effected by this addition. I never read anywhere that there was any upgrade in the lean angle sensor,  and it should have been on the R model from 2014 and up.

FSC will only work in ISTA P or + without the correct certs identified by the VIN. These FSC's are only created in the BMWAG system and released to the dealers network via the ISIS.

If you find someone that is willing to create a work order inside the BMWAG system without going to a dealer, please pass their name/ID to me. I would pay for FSC by VIN for other add on's available to the R and RR features.

Hello, there is one more question. Does F750GS need FSC to refit ABSPro?

[BMWS1000RR]

Hello, there is one more question. Does F750GS need FSC to refit ABSPro?

I am only associated with the S1000R and Double RR the strongest in knowledge.

what year is your 750GS? 

It depends on what ECU is in it. Most of the BMSX require an FSC. The BMSMP should have the ABSPro code already in the 4meg binary and maybe only need to be activated in ISTA+

[BMWF750GS]

Hello, there is one more question. Does F750GS need FSC to refit ABSPro?

I am only associated with the S1000R and Double RR the strongest in knowledge.

what year is your 750GS? 

It depends on what ECU is in it. Most of the BMSX require an FSC. The BMSMP should have the ABSPro code already in the 4meg binary and maybe only need to be activated in ISTA+

Thank you for your reply. My F750GS is from September 18, but it is shown as BMSX in e-sys.