Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Kafas heating error 800AC5
|
03-08-2019, 19:44 PM,
Post: #1
|
|||
|
|||
Kafas heating error 800AC5
Hi guys,
Hope you’ve had a nice day so far. Was wondering if anybody has encountered this fault / found a fix for it? screenshots attached* Any help would be greatly appreciated 
|
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
03-08-2019, 20:09 PM,
Post: #2
|
|||
|
|||
|
RE: Kafas heating error 800AC5
from kafas2 there's a resistance to warm it, you will see that there are two pins in windshield
BMW F10 530d 0911
Retrofit 223 245 248 2VB 2ND 316 337 4M5 416 ->451/488-->456 453 465 494 496 552 5AD 5AE 5AG NBT 654 FM2 610 620[CIC] 688 6NR 6WA & 6WB715 760 8TH-KAFAS2-FSC KeyFOB Mperformance Gxx Series |
|||
|
|
|
03-08-2019, 22:05 PM,
Post: #3
|
|||
|
|||
RE: Kafas heating error 800AC5
(03-08-2019, 20:09 PM)BMWzone Wrote: from kafas2 there's a resistance to warm it, you will see that there are two pins in windshield BMWzone, do these resistors usually go out so quickly (~50k km)? Because if that’s the case my only option would be to replace the windshield, something I’m not very fond of... thanks, |
|||
|
|
|
10-10-2019, 17:33 PM,
Post: #4
|
|||
|
|||
RE: Kafas heating error 800AC5
(03-08-2019, 22:05 PM)and1one Wrote:(03-08-2019, 20:09 PM)BMWzone Wrote: from kafas2 there's a resistance to warm it, you will see that there are two pins in windshield It seems that the heating circuit that is printed on the windshield has no continuity. Is there any way I can fix that? |
|||
|
|
|
10-10-2019, 20:13 PM,
Post: #5
|
|||
|
|||
|
RE: Kafas heating error 800AC5
Use a 50 Ohm resistor in the 2 pin's from the windshield and fake the heater with that.
 If my post helped you hit the thanks and reputation button. Thank you.  |
|||
|
|
|
10-10-2019, 20:36 PM,
Post: #6
|
|||
|
|||
RE: Kafas heating error 800AC5
(10-10-2019, 20:13 PM)user_530d Wrote: Use a 50 Ohm resistor in the 2 pin's from the windshield and fake the heater with that. Definitely a way to get rid of the error, thanks  .Was thinking to use some liquid silver to re-trace the interrupted path. Or to use a circuit repair kit (such as Permatex 09117). Tried to remove the camera assembly (the circuit is discontinued somewhere in the lower part) but it feels so flimsy, not that keen to pull it too hard. Tried youtube - checked all windshield replacement videos but none actually featured the removal of the kafas... kinda stuck here. Any suggestions? edit: newtis.info/tisv2/a/en/f32-430d-cou/repair-manuals/51-body-equipment/51-16-mirrors-finishers-ashtrays-consoles/1KuKMJDD Problem fixed with Permatex, the error is gone. |
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content
