Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW Icom A2 repair
28-09-2019, 02:47 AM,
Post: #71
|
|||
|
|||
RE: BMW Icom A2 repair
My icom clone have always fault aboute fan and wlan.
I do aboute 200 cars with it and nothing happens - errors was from the beginning. But if there is firmware version that exclude fan i will try. Is there any option to remove wlan fault too? Can you show me in with eeprom i must change serial number? If I helped, please magic buttons thx+rep
|
|||
28-09-2019, 11:17 AM,
Post: #72
|
|||
|
|||
RE: BMW Icom A2 repair
Post 64
detailed instructions |
|||
28-09-2019, 19:39 PM,
Post: #73
|
|||
|
|||
RE: BMW Icom A2 repair
Hello Friends anyone help me for the icom a2 terminal 15 is 0 volts have anyone any ideas or scheme how to find and fix this problem
|
|||
09-10-2019, 15:48 PM,
Post: #74
|
|||
|
|||
RE: BMW Icom A2 repair
|
|||
09-10-2019, 21:58 PM,
Post: #75
|
|||
|
|||
RE: BMW Icom A2 repair
Did you connect a fan?
Did the fan spin? I showed a photo of connecting a fan with a speed sensor. |
|||
10-10-2019, 19:11 PM,
Post: #76
|
|||
|
|||
RE: BMW Icom A2 repair
|
|||
10-10-2019, 20:39 PM,
Post: #77
|
|||
|
|||
RE: BMW Icom A2 repair
(30-08-2019, 10:25 AM)ferrum Wrote: This can be easily understood by looking at the datasheet mega16. Hi, I studied the datasheet of the mpc5200b now. It's impossible to get access to the Avdd-Pin - it's in the third row, so no change without desoldering the processor. Is there somewhare an simply accessable measurement point for checking power supply? Br Stiffi |
|||
10-10-2019, 23:22 PM,
(This post was last modified: 10-10-2019, 23:37 PM by ferrum.)
Post: #78
|
|||
|
|||
RE: BMW Icom A2 repair
You have a problem in mega16
I can give a breakpoint if it is available but you do not understand me. |
|||
15-10-2019, 16:56 PM,
Post: #79
|
|||
|
|||
RE: BMW Icom A2 repair
(10-10-2019, 23:22 PM)ferrum Wrote: You have a problem in mega16 Thanks. Running again Solution was a lot of contact spray for the mega16 I was always looking for the main processor but with your last post, I double checked and found mega16 Many many thanks! Br Chris |
|||
18-10-2019, 05:27 AM,
(This post was last modified: 18-10-2019, 05:29 AM by tictach.)
Post: #80
|
|||
|
|||
RE: BMW Icom A2 repair
Hi all .. anyone have icom a2 24c02 eeprom file . my icom leeds red al time and can not restor . read out 24c02 and se some hex missing comparing hex to picture i found.
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
FSC repair pack need help | HU_man | 2 | 81 |
09-06-2024, 18:42 PM Last Post: Rudkinp |
|
[RESTARTED] icom next clone repair (only single pcb) | ____ANGEL___ | 52 | 5,679 |
07-06-2024, 00:46 AM Last Post: faraz |
|
[MEGA] ESYS + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS | hashtagmaster | 115 | 38,911 |
06-06-2024, 16:31 PM Last Post: hashtagmaster |
|
BMW ICOM NEXT ORI All LED RED | aloxo | 7 | 393 |
05-06-2024, 21:56 PM Last Post: ferrum |
|
ICOM resetting with 4.47 | mcrussell | 14 | 883 |
04-06-2024, 12:01 PM Last Post: NeRkO20 |
|
ICOM Firmware (NEXT & A2) always current! | Vojno | 207 | 45,429 |
25-05-2024, 20:09 PM Last Post: Neon10 |
|
Fsc repair packet | Wojti77 | 4 | 201 |
24-05-2024, 05:40 AM Last Post: Thorsten |
|
F33 EPS repair pack FSC error | RuleNormaliai | 8 | 829 |
23-05-2024, 12:59 PM Last Post: Flash_W_88 |
|
FSC repair pack need help | HU_man | 1 | 81 |
22-05-2024, 09:50 AM Last Post: RaoulK1998 |
|
bmw kafas2 fsc repair kit | robiukaz1 | 154 | 24,112 |
15-05-2024, 17:03 PM Last Post: XALLECS |
Users browsing this thread:
7 Guest(s)
7 Guest(s)
Return to TopReturn to Content