Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
cas / cluster bench setup
23-01-2019, 18:43 PM,
Post: #81
|
|||
|
|||
RE: cas / cluster bench setup
(22-01-2019, 23:11 PM)Impac Wrote:(21-01-2019, 20:40 PM)Cowboy Wrote: I added FRM to my bench with modules, and tested the set with another CAS 2. Everything works. FRM module : connector X14260-51-pin, black: Pin 2=KL30 Pin 47=Ground Pin 45=K-bus signal/Connect to :JBBF Pin 10 CAN-bus connector (connector X14271-54-pin, blue) Pin 46=K-bus signal/Connect to :JBBF Pin 46 CAN-bus connector (connector X14271-54-pin, blue) connector X14261-51-pin, black Pin 1=KL30 Pin 3=KL30 Pin 34=KL30 Pin 18=Ground Pin 33=Ground Pin 12=Supply, terminal 15/ Connect to: CAS Pin 14 (connector X13376-41-pin, black) Greetings! |
|||
01-02-2019, 09:35 AM,
Post: #82
|
|||
|
|||
RE: cas / cluster bench setup
Strange. I removed my ELV. The set up still works!!
|
|||
25-03-2019, 22:04 PM,
Post: #83
|
|||
|
|||
RE: cas / cluster bench setup
Hi,
if OBD port from newer models (e.g. E90) with 120Ohm resistor inside is required? I've got OBD from E46 , but there is a resistor on cover, so I assume there is no any other inside. Only BMW services:
Remote coding/programming - E, F, G serie HDD change, Carplay, Screen mirroring activation FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS Remote reset 8HP ISN F serie ELV disable for CAS3, 3+ |
|||
25-08-2019, 14:07 PM,
Post: #84
|
|||
|
|||
RE: cas / cluster bench setup
I made the bench setup from page 5 the updated one. it works but my key wont stay in, it pops out when i let it go. any idea?
|
|||
25-08-2019, 14:36 PM,
Post: #85
|
|||
|
|||
RE: cas / cluster bench setup
The key holder or CAS is corrupted or your CAS not receiving the power supply
Only BMW services:
Remote coding/programming - E, F, G serie HDD change, Carplay, Screen mirroring activation FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS Remote reset 8HP ISN F serie ELV disable for CAS3, 3+ |
|||
26-08-2019, 07:09 AM,
Post: #86
|
|||
|
|||
RE: cas / cluster bench setup
(23-01-2019, 18:43 PM)Cowboy Wrote:(22-01-2019, 23:11 PM)Impac Wrote:(21-01-2019, 20:40 PM)Cowboy Wrote: I added FRM to my bench with modules, and tested the set with another CAS 2. Everything works. The assignment is for which FRM module? Kombiinstrumente nullen, G-Key für F-Modelle, FRM3 Reparatur, EGS 8HP ISN löschen, Benutzter Schlüssel löschen, Schlüssel für EWS / CAS / FEM / BDC, Klonen EWS / CAS / FEM / BDC, Tempolimit Info, GTS Software für M2 / 3/4, Fxx Gxx Alpina Getriebesoftware, uvm ..
|
|||
26-08-2019, 16:24 PM,
Post: #87
|
|||
|
|||
RE: cas / cluster bench setup
(26-08-2019, 07:09 AM)Stromag Wrote:(23-01-2019, 18:43 PM)Cowboy Wrote:(22-01-2019, 23:11 PM)Impac Wrote:(21-01-2019, 20:40 PM)Cowboy Wrote: I added FRM to my bench with modules, and tested the set with another CAS 2. Everything works. You can check connection pinouts for specific FRM here: newtis.com Only BMW services:
Remote coding/programming - E, F, G serie HDD change, Carplay, Screen mirroring activation FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS Remote reset 8HP ISN F serie ELV disable for CAS3, 3+ |
|||
26-08-2019, 16:42 PM,
Post: #88
|
|||
|
|||
RE: cas / cluster bench setup
(26-08-2019, 16:24 PM)Matthew53 Wrote:(26-08-2019, 07:09 AM)Stromag Wrote:(23-01-2019, 18:43 PM)Cowboy Wrote:(22-01-2019, 23:11 PM)Impac Wrote:(21-01-2019, 20:40 PM)Cowboy Wrote: I added FRM to my bench with modules, and tested the set with another CAS 2. Everything works. I just wanted to know if this assignment is for the FRM3 or FRM2 ..? And if the occupancy for FRM3 and FRM2 is different .. Kombiinstrumente nullen, G-Key für F-Modelle, FRM3 Reparatur, EGS 8HP ISN löschen, Benutzter Schlüssel löschen, Schlüssel für EWS / CAS / FEM / BDC, Klonen EWS / CAS / FEM / BDC, Tempolimit Info, GTS Software für M2 / 3/4, Fxx Gxx Alpina Getriebesoftware, uvm ..
|
|||
26-08-2019, 16:48 PM,
Post: #89
|
|||
|
|||
RE: cas / cluster bench setup
(26-08-2019, 16:42 PM)Stromag Wrote:(26-08-2019, 16:24 PM)Matthew53 Wrote:(26-08-2019, 07:09 AM)Stromag Wrote:(23-01-2019, 18:43 PM)Cowboy Wrote:(22-01-2019, 23:11 PM)Impac Wrote: Can you post which pins you used for FRM? Yes, that's why I gave you the site to verify this pinouts by VIN or model. It's always good to verify it with newtis, even if you have everything right here. Only BMW services:
Remote coding/programming - E, F, G serie HDD change, Carplay, Screen mirroring activation FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS Remote reset 8HP ISN F serie ELV disable for CAS3, 3+ |
|||
25-02-2022, 11:47 AM,
Post: #90
|
|||
|
|||
RE: cas / cluster bench setup
Hi Guys
i have a Bench with JBBFE2/CAS3 without ELV. I have some Connectors on it for example, FRM, Kombi, Headunit. Everything is working well. Today i tried to Connect LM2, in Inpa i can see it but i dont have communication to the Module. I have the SSD for a compatible Car in NCS, so this is not the Problem. Pin 9 12V Pin 47 12V Pin 56 GND Pin 57 GND Pin 31 12V/Wakeup Any Ideas? Nor impossible? |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
ID8 with BCP on bench, can't turn on ignition | Matthew53 | 0 | 93 |
21-05-2024, 18:47 PM Last Post: Matthew53 |
|
ESys Launcher PRO Setup 2.8.1 | fengyonghua21 | 414 | 51,657 |
15-05-2024, 18:24 PM Last Post: Pommie |
|
E85 cluster eeprom VIN location | stydly | 3 | 155 |
08-05-2024, 19:47 PM Last Post: gabur431 |
|
mini f60 countryman, mileage issues red dot after cluster replacement | deutsch | 6 | 218 |
08-05-2024, 11:15 AM Last Post: EngineerX |
|
Bmw explorer msd80 isn read out bench? | xMoses | 9 | 794 |
30-04-2024, 01:07 AM Last Post: that4chanhacker |
|
F20 LCI2 black panel cluster coding | sqorpius | 10 | 2,150 |
27-04-2024, 06:51 AM Last Post: hamzettin |
|
Instrument cluster e46 | mapkrk | 2 | 212 |
27-04-2024, 00:33 AM Last Post: mapkrk |
|
Bmw f10 6wa cluster mileage jumping 160D0WT | Bavrian | 4 | 188 |
24-04-2024, 09:32 AM Last Post: Bavrian |
|
6wb cluster swap and coding | xMoses | 4 | 281 |
22-04-2024, 19:07 PM Last Post: NikolaIMRS |
|
MGU Bench connection | kimz | 4 | 575 |
22-04-2024, 17:06 PM Last Post: kimz |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content