[Flashdriver]

Good evening friends month also I have the same problem with ista-d 4.32.15 and icom next orginal firmware 3.15.08 the icom it is well detected by the network card of the pc and itool radar and in ista but it is not not detect car computers.
I tested with three icoms and three deferent PCs and deferent cars.
and all icom works fine under ista-d 4.31.40

I had a problem in the adapter settings of the network card. I ran the Windows troubleshooting option (diagnostics) over the network card and after that the ICOM was recognized again in ISTA+. The IP had also changed from 169.254.xxx.xxx to 192.168.xxx.xxx. I think it is related to the DHCP server in the network card option. Maybe you have stored a fixed DHCP server or a fixed IP address in the TCP/IP4 protocol of your network card?

As I said, let the Windows diagnostics run over your network card.

[dlgudqja1282]

I have now updated the ICOM A2 to this firmware 03-15-09.
But I can't access to the vehicle with ISTA 4.34.30.
It says that ICOM needs lastest firmware.
Does anyone know what is the latest version of ISTA I can use with this firmware 03-15-09?

[Vojno]

I have now updated the ICOM A2 to this firmware 03-15-09.
But I can't access to the vehicle with ISTA 4.34.30.
It says that ICOM needs lastest firmware.
Does anyone know what is the latest version of ISTA I can use with this firmware 03-15-09?

For A/A2 is the 03-15-09 is the latest, but sometimes need to update two times!

[Romashka]

Thanks a lot. Updated Icom A1

[Lightred]

Good evening friends month also I have the same problem with ista-d 4.32.15 and icom next orginal firmware 3.15.08 the icom it is well detected by the network card of the pc and itool radar and in ista but it is not not detect car computers.
I tested with three icoms and three deferent PCs and deferent cars.
and all icom works fine under ista-d 4.31.40

I had a problem in the adapter settings of the network card. I ran the Windows troubleshooting option (diagnostics) over the network card and after that the ICOM was recognized again in ISTA+. The IP had also changed from 169.254.xxx.xxx to 192.168.xxx.xxx. I think it is related to the DHCP server in the network card option. Maybe you have stored a fixed DHCP server or a fixed IP address in the TCP/IP4 protocol of your network card?

As I said, let the Windows diagnostics run over your network card.

Hallo, i had similar problems and ran network diagnostics with sucsess clapping. Thank you for the hint.

Greetings Lightred

[Diaginstall]

I tried everything friends, I even did a new automatic installation with the "Sedoy" software and I even restored the icom with the USB key, but still nothing, it is well recognized in itool radar and ista it sees the chassis number well, but does not communicate with the ecu.

[Bimmer540]

Which type of BMW?

[Diaginstall]

Which type of BMW?

today F15

[juve18]

Hello.What firmware on icom next orginal to be used with latest 4.34.40? Because i install 04-22-10 and on this version say status firmware i use 4.29 version on other laptop with this firmware and runs ok.

[sguzzel]

Have a look at the registry
Computer\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\Rheingold
at my computer IcomNext.Package.Version.Compatible has the value "04-22-02"
As I installed the 04-22-02 ISTA was working without the firmware reminder.

Nevertheless does anybody know if 04-22-02 is save to use? I have to flash a whole car.