Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ESYS / ICOM No Connection
31-08-2022, 18:41 PM,
Post: #1
|
|||
|
|||
ESYS / ICOM No Connection
Hi!
ICOM works with ISTA+. Not with ESYS. I reserve the IP at itoolradar. I enter the displayed IP in the ESYS connection manager +:50160. ZGW is also not available. Enet cable also works with ESYS, just not ICOM. What am I doing wrong? Thanks. |
|||
31-08-2022, 18:53 PM,
Post: #2
|
|||
|
|||
RE: ESYS / ICOM No Connection
Did you fill in ip adres in Ediabas.ini on C Ediabas, bin, Ediabas.ini
|
|||
31-08-2022, 18:57 PM,
Post: #3
|
|||
|
|||
RE: ESYS / ICOM No Connection
no where exactly?
The IP changes, do you have to do it every time? |
|||
31-08-2022, 19:01 PM,
Post: #4
|
|||
|
|||
RE: ESYS / ICOM No Connection
(31-08-2022, 18:41 PM)nobbynobbs Wrote: Hi! Try diagnose with ista. After ista ends, without disconnecting, try connect with esys via "icom/ethernet" |
|||
31-08-2022, 19:04 PM,
Post: #5
|
|||
|
|||
RE: ESYS / ICOM No Connection
@cursor: Leave ISTA open, don't exit?
|
|||
31-08-2022, 19:10 PM,
Post: #6
|
|||
|
|||
RE: ESYS / ICOM No Connection
(31-08-2022, 18:53 PM)Bmw325x Wrote: Did you fill in ip adres in Ediabas.ini on C Ediabas, bin, Ediabas.ini I think you absolutely not familiar with E-Sys and Ediabas. What has Ediabas settings with E-Sys todo? |
|||
31-08-2022, 19:17 PM,
Post: #7
|
|||
|
|||
RE: ESYS / ICOM No Connection
With Dr.Gini reserve the icom.
in E-Sys -> Connection -> iCOM/ethernet -> put the ip from ur icom Only eNET can find the ZGW directly. |
|||
31-08-2022, 20:25 PM,
(This post was last modified: 31-08-2022, 20:26 PM by Bmw325x.)
Post: #8
|
|||
|
|||
RE: ESYS / ICOM No Connection
(31-08-2022, 19:17 PM)DieStream Wrote: With Dr.Gini reserve the icom. Yes thats what i mean. (31-08-2022, 19:10 PM)Sedoy Wrote:Sorry my fault. Ip adres fiill in Esys(31-08-2022, 18:53 PM)Bmw325x Wrote: Did you fill in ip adres in Ediabas.ini on C Ediabas, bin, Ediabas.ini |
|||
31-08-2022, 20:38 PM,
(This post was last modified: 31-08-2022, 20:41 PM by Tabby123.)
Post: #9
|
|||
|
|||
RE: ESYS / ICOM No Connection
(31-08-2022, 18:41 PM)nobbynobbs Wrote: Hi! You don't need to reserve the IP at itoolradar. Just enter IP into esys connection manager as you mentioned. If it doesn't work, disconnect battery from vehicle, reconnect after 3-4 minutes and try again (31-08-2022, 18:57 PM)nobbynobbs Wrote: no where exactly? Yes you'll need to change IP in esys connection manager evertime it changes |
|||
01-09-2022, 04:32 AM,
Post: #10
|
|||
|
|||
RE: ESYS / ICOM No Connection
if you need help with teamviwer when i have time i can do
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content