Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Raw data readout for G series vehicles
|
19-10-2022, 17:09 PM,
Post: #1
|
|||
|
|||
Raw data readout for G series vehicles
Hi,
Is there any program for G series vehicles that has raw digital and analogue presentation, much like INPA has for E/F Series? Thanks |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
19-10-2022, 18:29 PM,
Post: #2
|
|||
|
|||
|
RE: Raw data readout for G series vehicles
Just use tool32
|
|||
|
|
|
19-10-2022, 19:03 PM,
Post: #3
|
|||
|
|||
|
RE: Raw data readout for G series vehicles
To be honest, I havent used Tool32 before. Does it provide this kind of on-the-fly data?
|
|||
|
|
|
21-10-2022, 22:02 PM,
Post: #4
|
|||
|
|||
|
RE: Raw data readout for G series vehicles
This is very flexible software. You need to know a lot of arguments in order to use all the commands. Write each command manually. Or use macros as a test
|
|||
|
|
|
22-10-2022, 06:34 AM,
Post: #5
|
|||
|
|||
|
RE: Raw data readout for G series vehicles
Use expert mode in ISTA. Then you have it logged and single person can review it later after driving a car. With INPA you need two people - one to drive, another to look at the readings.
|
|||
|
|
|
22-10-2022, 15:37 PM,
Post: #6
|
|||
|
|||
RE: Raw data readout for G series vehicles
(22-10-2022, 06:34 AM)Node Wrote: Use expert mode in ISTA. Then you have it logged and single person can review it later after driving a car. With INPA you need two people - one to drive, another to look at the readings. How exactly does this work? Do I keep ISTA running and connected while driving and then review data afterwards? For E series, there is also a program called TestO that produces graphs, and you can save them for later viewing. (21-10-2022, 22:02 PM)Alive006 Wrote: This is very flexible software. You need to know a lot of arguments in order to use all the commands. Write each command manually. Or use macros as a test Thanks. At this time, I am not yet comfortable or knowledgeable to go full in with manual coding on my new G11. In time, I'm sure I'll get there. |
|||
|
|
|
22-10-2022, 15:43 PM,
Post: #7
|
|||
|
|||
RE: Raw data readout for G series vehicles
(22-10-2022, 15:37 PM)Raimo5 Wrote:(22-10-2022, 06:34 AM)Node Wrote: Use expert mode in ISTA. Then you have it logged and single person can review it later after driving a car. With INPA you need two people - one to drive, another to look at the readings. Yes, it works exactly like that. You can also set some triggers for recording to start. Like reaching certain speed, or something like that. Then ISTA won't record until that condition is reached. Saving you trouble of finding proper data when you know that issue happens under certain condition only. |
|||
|
|
|
22-10-2022, 15:54 PM,
Post: #8
|
|||
|
|||
|
RE: Raw data readout for G series vehicles
Thanks a lot mate. I'll give it a try at the first possible chance.
|
|||
|
|
|
22-10-2022, 17:19 PM,
Post: #9
|
|||
|
|||
|
RE: Raw data readout for G series vehicles
hello,
Testo runs with every BMW. - FSC Apple CarPlay for NBT Evo Fullscreen and MGU OEM
- FSC-Set for Retrofit CiC, NBT and NBT Evo with USB 18-11 or remote - FSC Kafas BE, BF and 7E SLI, Kafas4 Speedlimit 11F, WWA 13, FCW 13F - VIM for NBT Evo, install with USB 18-11 or remote - FSC for BMW Apps, Sirius Radio, EPS ------------- Location is Germany |
|||
|
|
|
24-10-2022, 09:12 AM,
Post: #10
|
|||
|
|||
|
RE: Raw data readout for G series vehicles
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
