Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
i have strange problem with E60 CCC show Headunit not coded correctly
19-12-2022, 15:19 PM,
(This post was last modified: 19-12-2022, 15:20 PM by iyade46.)
Post: #1
|
|||
|
|||
i have strange problem with E60 CCC show Headunit not coded correctly
i have strange problem with E60 CCC show Headunit not coded correctly
when i scan for faults the only fault i can find is S0630 Programming abort: MOST Gateway |
|||
19-12-2022, 15:24 PM,
Post: #2
|
|||
|
|||
RE: i have strange problem with E60 CCC show Headunit not coded correctly
that is not CCC, that is M-ASK.
you should re-program it |
|||
19-12-2022, 20:11 PM,
Post: #3
|
|||
|
|||
RE: i have strange problem with E60 CCC show Headunit not coded correctly
Needs programming on ICOM as for a guess someone had a bash with a DCAN cable and soft bricked it.
|
|||
19-12-2022, 21:12 PM,
(This post was last modified: 19-12-2022, 21:13 PM by TurboDriver.)
Post: #4
|
|||
|
|||
RE: i have strange problem with E60 CCC show Headunit not coded correctly
Doesn't need reprogramming. Just code it. Unit is from another car not coded for this car
|
|||
20-12-2022, 10:51 AM,
Post: #5
|
|||
|
|||
RE: i have strange problem with E60 CCC show Headunit not coded correctly
Mask is stuck in programming mode, need to be flashed again using proper equipment (ICOM + most).
Then must be coded to car. You can also try only code, and even code off compability checking using ncs expert |
|||
20-12-2022, 10:57 AM,
(This post was last modified: 20-12-2022, 10:58 AM by keanu1979.)
Post: #6
|
|||
|
|||
RE: i have strange problem with E60 CCC show Headunit not coded correctly
icom and adapter for most
i can flash in remote try coding with ncs expert |
|||
20-12-2022, 10:58 AM,
(This post was last modified: 20-12-2022, 11:04 AM by iyade46.)
Post: #7
|
|||
|
|||
RE: i have strange problem with E60 CCC show Headunit not coded correctly
(19-12-2022, 15:24 PM)dumitru.o Wrote: that is not CCC, that is M-ASK. i try to reprogram but didnt success i use most connector (20-12-2022, 10:51 AM)wjgud123 Wrote: Mask is stuck in programming mode, need to be flashed again using proper equipment (ICOM + most). i did still the same (19-12-2022, 20:11 PM)GoNz0- Wrote: Needs programming on ICOM as for a guess someone had a bash with a DCAN cable and soft bricked it. what the owner say that he changed MPM module after water damaged it then the problem happen |
|||
20-12-2022, 16:05 PM,
Post: #8
|
|||
|
|||
RE: i have strange problem with E60 CCC show Headunit not coded correctly
Did you code with ista-p or winkfp?
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
22-12-2022, 06:20 AM,
Post: #9
|
|||
|
|||
RE: i have strange problem with E60 CCC show Headunit not coded correctly
|
|||
22-12-2022, 17:12 PM,
Post: #10
|
|||
|
|||
RE: i have strange problem with E60 CCC show Headunit not coded correctly
Old software or latest?
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content